Cisco TelePresence System Codec C90 and Profile 65” Dual using C90
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Administrator guide
Contact us
Experimental
Audio MicrophoneReinforcement Output Line [1..6] Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Microphone reinforcement is local amplification of one or several input connectors, directly to one or several output connectors, with minimum delay.
For software version TC4.0: Microphone reinforcement should not be enabled on a codec that is also configured using the Audio Console application.
Configuring this setting to On for an output line, means to attach that output connector to the microphone reinforcement for local amplification. If the output connector already is attached to a Local Output, it will first be detached from that before being attached to the Microphone reinforcement. When this setting is On, the output connector cannot be attached to any Local Output.
Requires user role: ADMIN
Value space: <On/Off>
Example: Experimental Audio MicrophoneReinforcement Output Line 1 Mode: On
Experimental
Audio Panning Mode
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Off/Auto>
Example: Experimental Audio Panning Mode: Off
Experimental
Audio Panning MonitorRight
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Example: Experimental Audio Panning MonitorRight: 1
Experimental
SystemUnit MenuType
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Indicators/Full>
Example: Experimental SystemUnit MenuType: Full
Experimental
Audio Panning MaxAngle
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <0..90>
Example: Experimental Audio Panning MaxAngle: 0
Experimental
Audio Panning MonitorLeft
NOTE: This Experimental command can be used 'as is' and will not be further documented. The Experimental settings WILL change.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Example: Experimental Audio Panning MonitorLeft: 1
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 69 | www.cisco.com |
Copyright © |