Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 | Administrator guide |
Contents | Introduction | Web interface | Advanced configuration | Password protection | Appendices |
Contact us
SystemUnit CallLogging Mode
Set the call logging mode for calls that are received or placed by the system. The call logs may then be viewed via the menus on screen or using the xHistory command.
Requires user role: ADMIN
Value space: <On/Off>
On: Enable logging.
Off:Disable logging.
Example: SystemUnit CallLogging Mode: On
SystemUnit IrSensor Mode
Both the Codec C Series and PrecisionHD camera have IR sensors, and only one of them needs to be enabled at the time. The IR sensor LED is located on the front of the codec and the camera and flickers when an IR signal is received from the remote control.
Requires user role: ADMIN
Value space: <On/Off/Auto>
On: Enable the IR sensor on the codec.
Off:Disable the IR sensor on the codec.
Auto: The system will automatically disable the IR sensor on the codec if the IR sensor at camera is enabled. Otherwise, the IR sensor on the codec will be enabled.
Example: SystemUnit IrSensor Mode: Auto
The Time settings
Time DateFormat
Set the date format.
Requires user role: USER
Value space: <DD _ MM _ YY/MM _ DD _ YY/YY _ MM _ DD> DD_MM_YY: The date January 30th 2010 will be displayed: 30.01.10 MM_DD_YY: The date January 30th 2010 will be displayed: 01.30.10 YY_MM_DD: The date January 30th 2010 will be displayed: 10.01.30
Example: Time DateFormat: DD _ MM _ YY
Time TimeFormat
Set the time format.
Requires user role: USER
Value space: <24H/12H>
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Example: Time TimeFormat: 24H
D14635.05 Profile C90 and Codec C90 Administrator Guide TC4.1, February 2011. | 58 | www.cisco.com |
Copyright © |