AMX MAX-CSD10, MAX-CSE Stream Profiles Page Features, Feature Description Encoder Profile, Video

MAX-CSE Web Interface

In a UDP stream, only a Target (video) Port is needed since both the audio and video information are transported together to the same port on the destination device.

RTP (Real-Time Transport Protocol) is an Internet protocol used for transmitting real-time data such as audio and video as separate entities. Data is sent as an Elementary Stream which can use both the MPEG-2 and MPEG-4 codecs.

In an RTP stream, both a Target (video) Port and Target Audio Port are required because the audio and video are delivered to a destination as separate data elements. These elements are then directed to two separate ports where they are then

"synced-up" by target device/application.

If using RTP, both the Target Port and Target Audio Port must be different.

When the a lower quality Encoder Profile is used (such as Standard Quality or lower), the Stream parameters default to using RTP as a Transport Protocol. This is because lower quality video uses MPEG-4 compression which must be sent via RTP.

IP Multicasting is a method of sending out large amounts of data. IP Multicast allows a server to broadcast a message to many recipients simultaneously. Unlike traditional Internet communication, that requires separate connections for each source-destination pair, IP Multicasting allows several recipients to share data from the same source. This means that just one set of packets is transmitted to all the destinations.

An ideal method of sharing a single stream to several destinations.

One of the best uses for this method would be if an educator (or institution) wanted to stream (via either UDP or RTP) its lecture series to a variety of students simultaneously around the world. Every student could connect and receive the stream without having to wait their turn to view the content or see a severe drop in transmission quality.

The following table lists the Stream Profiles page features that an administrator or other authorized user can configure. Refer to FIG. 16 as an example.

Stream Profiles Page Features

Feature	Description
Encoder Profile:	A drop-down list of preset encoding profile names which the user can choose from
	when assigning a particular set of audio/video encoding settings.
	• Although the default selection is Home Theater (Max), the user can choose from up
	to 6 pre-created entries and one Custom entry which makes every field
	user-definable.
	• Refer to the Encoder Profiles and Parameters table on page 31 to view the details of
	these pre-defined audio/video encoding parameters.
Video:	This section allows the user/administrator to define the encoding parameters for the
	video portion of the outgoing stream.
Codec	A drop-down list of codecs from which the user can choose the type of MPEG video
	compression used for the outgoing video stream.
	• Available MPEG codecs: MPEG-2(default) or MPEG-4
	• MPEG-2 is typically used to encode audio and video for broadcast quality signals.
	The MPEG-2 is enhanced by using MPEG-1's audio (MP2) component to allow the
	coding of audio programs with more than two channels. Video quality is noticeably
	higher with MPEG-2 vs. MPEG-4.
	• MPEG-4 is currently used as a standard for the web (streaming media) and CD
	distribution, conversational (videophone), and broadcast television. The biggest
	difference between these two encoding types is that MPEG-4 uses about 1/3 to 1/2
	less bandwidth for the same quality of video.

MAX-CSE/MAX-CSD10 Operation/Reference Guide 27