AMX MAX-CSD10, MAX-CSE Sendcommand DEV,GET Session List, Sendcommand DECODER,GET Session List

NetLinx Programming

MAX-CSD10 Streaming Send_Commands (Cont.)

Command	Description
GET SESSION LIST	Requests the number of entries in the SAP session list.
Get the number of streaming	Syntax:
sessions in the SAP session	SEND_COMMAND <DEV>,"'GET SESSION LIST'"
list.
	Variable:
	sessions = number of entries in the list
	Example:
	SEND_COMMAND DECODER,"'GET SESSION LIST'"
	System response:
	SESSION LIST=3
	Indicates that there are 3 entries in the SAP session list.
GET STREAM STATUS	Requests the status of whether the decoder is playing or stopped.
Get a description of the	Syntax:
streaming state.	SEND_COMMAND <DEV>,"'GET STREAM STATUS'"
	Variable:
	status = IDLE or STREAMING.
	Example:
	SEND_COMMAND DECODER,"'GET STREAM STATUS'"
	System response:
	STREAM STATUS =IDLE
	Indicates that the MAX-CSD10 is currently idle.
GET URL	Requests the current configuration of the URL communication parameters. The
Get a description of the URL	returned information includes: communication protocol, IP Address, and port
	used.
parameters being used by the
current audio/video stream.	Syntax:
	SEND_COMMAND <DEV>,"'GET URL'"
	Variables:
	protocol = RTP or UDP.
	address = Address of stream in IPv4 dot notation (ex: X.X.X.X).
	port = Primary port for audio/video transport.
	audio port = Port for audio stream (RTP only).
	Example:
	SEND_COMMAND DECODER,"'GET URL'"
	System response for UDP:
	URL=UDP 239.168.42.10 1234 1234
	Indicates that the UDP audio/video stream has previously been configured to
	use a multicast session (UDP) at an IP Address of 239.168.42.10, where it
	uses port 1234.
	System response for RTP:
	URL=RTP 239.168.42.10 5000 5002
	Indicates that the individual RTP audio/video streams has previously been
	configured to use an IP Address of 224.168.42.10, where it uses port 5000 for
	the video stream and port 5002 for the audio stream.

MAX-CSE/MAX-CSD10 Operation/Reference Guide 91