Lathem 6000E manual Setting, Preparation for setting, Key hole Panel house Display

Page 11

5. SETTING

Preparation for setting

To prepare for setting:

1 Unlock the unit. While holding down	2 Remove the panel cover.
the panel open buttons at both sides of the
unit and lift the panel cover away from

you.
	Panel open button
Panel cover	(at both sides of the unit)
Panel cover

Key hole

Panel house

Display

Control button

3 Make settings using the display and control buttons at the panel house.

Be sure to make settings with the power on.

Upon opening the panel cover, the PAY ENDING button lights up and the unit is in the pay ending setting mode.

Make sure to press SET at the completion of each setting. Contents are NOT stored in memory if SET is not pressed.

ENGLISH

Image 11

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Signs PrecautionsDaily Care Features Daylight saving time indication Day of the week indication AccessoriesLocation of Controls Panel open button Installing Ribbon CassetteEnvironmental Conditions Mounting Unit on WallDaily Operations SettingKey hole Panel house Display SettingPreparation for setting To prepare for setting Unlock the unit. While holding downStays LIT UP Setting Pay Ending and Card / Print LanguageMonthly Closing 2EMOVE the Panel COVERPrint language Day of the week Weekly ClosingToday is printed on the second line from the top Bi-weekly closing Bi-Weekly ClosingEnglish DATE/TIME 12/24 Hour formatSelect English To cause digits to flash, and then press or Setting the Day Advance Time$A Aadvancedtime Press orDaylight saving time function Setting the Daylight Saving Time D.S.TTo Select Theh Month and DA3TARTADATE OFD$34 1/60 3ETTINGTTHENSTARTTDATEEnd date How to Cancel D.S.T. SettingsEXT DAY Setting the Time Table ProgramTime to be set External time signal Column Disabled no setting EnabledFollow the steps to set time table programs Print color 00 Black 01 RedLower left of the display Represents print in black Press Print in redTo set P-01 shown in the table Above Print color With P-01 flashing, press OnceErase under TU MinuteErase under MO Staying lit up Erase under MO SAPrint in black1/100 External 1/60 time signal 1/100Make the bars Under MO-SA lit upIndication at To check program settingsTo modify program settings To erase program settings84 !,!2 Press Select to cause EXT. Alarm to light upSEC DS Resetting Maximum of 8 bells/horns typical Connection Specifications for External ContactOttom 6IEW ScrewInstalling Ni-Cd Battery optional Other failures TroubleshootingError No. appears Connection SpecificationsExternal time signal Temperature -5˚ to + 45˚CTime Card Specifications Semi-Monthly Card Q0086 6120