Lathem 6000E manual Installing Ribbon Cassette, Panel open button

Page 8

Installing Ribbon Cassette

	Panel open button
Panel cover	(at both sides of the unit)
Panel cover

Key hole

Panel house

Ribbon cassette

Print head

Print head

Ribbon mask

1Unlock the unit. While holding down the panel open buttons at both sides of the unit, lift the panel cover away from you.

2Turn the knob on the cassette in the arrow-indicated direction to make the ribbon taut.

To insert the ribbon cassette inside the unit, lift the panel house away from

you first. Then thread the ribbon between the ribbon mask and the print head. Slide the latch on the lower side of the cassette into projections on the unit. Then let the cassette snap into place.

When having difficulty inserting the ribbon, insert it while turning the knob.

Make sure that the ribbon is placed between the print head and the ribbon mask as illustrated in the figure at left.

3Put the panel cover on the hook at the back of the unit. Lower it toward this side to close and lock the unit.

Panel cover

Ribbon

5

Image 8

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions SignsDaily Care Features Daylight saving time indication Day of the week indication AccessoriesLocation of Controls Installing Ribbon Cassette Panel open buttonMounting Unit on Wall Environmental ConditionsSetting Daily OperationsSetting Preparation for settingTo prepare for setting Unlock the unit. While holding down Key hole Panel house DisplaySetting Pay Ending and Card / Print Language Monthly Closing2EMOVE the Panel COVER Stays LIT UPPrint language Day of the week Weekly ClosingToday is printed on the second line from the top Bi-Weekly Closing Bi-weekly closingEnglish DATE/TIME 12/24 Hour formatSelect English Setting the Day Advance Time $A AadvancedtimePress or To cause digits to flash, and then press orSetting the Daylight Saving Time D.S.T Daylight saving time functionMonth and DA 3TARTADATE OFD$34 1/603ETTINGTTHENSTARTTDATE To Select ThehHow to Cancel D.S.T. Settings End dateSetting the Time Table Program EXT DAYExternal time signal Column Disabled no setting Enabled Follow the steps to set time table programsPrint color 00 Black 01 Red Time to be setPrint in red To set P-01 shown in the tableAbove Print color With P-01 flashing, press Once Lower left of the display Represents print in black PressErase under TU MinuteErase under MO Erase under MO SA Staying lit upExternal 1/60 time signal 1/100 Make the barsUnder MO-SA lit up Print in black1/100To check program settings To modify program settingsTo erase program settings Indication at84 !,!2 Press Select to cause EXT. Alarm to light upSEC DS Resetting Connection Specifications for External Contact Ottom 6IEWScrew Maximum of 8 bells/horns typicalInstalling Ni-Cd Battery optional Other failures TroubleshootingError No. appears Specifications External time signalTemperature -5˚ to + 45˚C ConnectionTime Card Specifications Semi-Monthly Card Q0086 6120