Lathem 6000E manual Erase under MO SA, Staying lit up

Erase "-" under MO - SA.

12Hr. SU MO TU WE TH FR SA

1/60

1/100

YEAR MONTH DAY HOUR MINUTE SECOND/CARD

RED/BLK. EX.ALM COL.

PAY ENDING DATE/TIME DAY ADV.TIME	D.S.T	PROGRAM	EXT.ALARM
SELECT			SET

Take the same steps described above to erase the bars for the remaining days of the week.

After erasing the bar under "SA", press SET .

12Hr. SU MO TU WE TH FR SA

	1/60
Staying lit up	1/100

YEAR MONTH DAY HOUR MINUTE SECOND/CARD

RED/BLK. EX.ALM COL.

PAY ENDING DATE/TIME DAY ADV.TIME D.S.T	PROGRAM EXT.ALARM
SELECT		SET

The P-01 indication stays lit up completing the P-01 program setting.

Make sure the bar under any day of the week stays lit up. If none of the bar stays lit up, the time table program will not operate properly.

P-02

Flashing

12Hr.

SU MO

TU

WE TH

FR SA

1/60

1/100

YEAR

MONTH

DAY

HOUR

MINUTE

SECOND/CARD

RED/BLK.

EX.ALM

COL.

PAY ENDING DATE/TIME DAY ADV.TIME

D.S.T

PROGRAM

EXT.ALARM

SELECT

SET

Staying lit up			12Hr.		SU MO	TU	WE TH		FR SA
		1/60
		1/100
		YEAR		MONTH	DAY	HOUR		MINUTE	SECOND/CARD
		RED/BLK.		EX.ALM	COL.
	PAY ENDING DATE/TIME DAY ADV.TIME					D.S.T			PROGRAM	EXT.ALARM
	SELECT									SET

3To set P-02

After the setting of P-01 is completed,

press . The program NO., the indication at the upper left "P-01"

flashes. Then press to enter "P-02" setting mode.

The program NO., indication "P-02" flashes.

Make settings for P-02 in the same manner as for P-01, as illustrated in the figures at the left.

Press SET .

The P-02 indication now stays lit up, showing completion of the P-02 program setting.

Likewise, to shift to P-03, press to cause the P-03 indication to appear flashing.

23