Lathem 6000E To check program settings, To modify program settings, To erase program settings

Page 28

To check program settings

Press SELECT to cause PROGRAM to light up. Make the desired program No.

flash. To see program settings, press .

The button switches among programs in order starting from P-01. Program contents are shown on the display in order starting from Sunday and the line feed time.

To modify program settings

Press SELECT to cause PROGRAM to light up. Make the desired program No. flash.

Press , , , or to change the settings in the same manner as in its initial setting.

To erase program settings

Press SELECT to cause PROGRAM to light up. Make the desired program No.

flash. The button switches among programs in order starting from P-01. Select the desired program No.

To erase it, set the print column indication at "00" and press SET .

Example:

To erase P-04, set the print column indication at "00" and press SET as shown in the figure at left.

12Hr. SU MO TU WE TH FR SA

1/60

1/100

Set the print column

YEAR

MONTH

DAY

HOUR MINUTE

SECOND/CARD

indication at "00".

RED/BLK.

EX.ALM

COL.

PAY ENDING

DATE/TIME DAY ADV.TIME

D.S.T

PROGRAM

EXT.ALARM

SELECT

SET

Follow the same procedure described above

to make settings for the desired program.

25

Image 28

Contents Lathem Time Corporation Lathem Time Corporation Table of Contents Precautions SignsDaily Care Features Location of Controls AccessoriesDaylight saving time indication Day of the week indication Installing Ribbon Cassette Panel open buttonMounting Unit on Wall Environmental ConditionsSetting Daily OperationsSetting Preparation for settingTo prepare for setting Unlock the unit. While holding down Key hole Panel house DisplaySetting Pay Ending and Card / Print Language Monthly Closing2EMOVE the Panel COVER Stays LIT UPToday is printed on the second line from the top Weekly ClosingPrint language Day of the week Bi-Weekly Closing Bi-weekly closingEnglish Select 12/24 Hour formatDATE/TIME English Setting the Day Advance Time $A AadvancedtimePress or To cause digits to flash, and then press orSetting the Daylight Saving Time D.S.T Daylight saving time functionMonth and DA 3TARTADATE OFD$34 1/603ETTINGTTHENSTARTTDATE To Select ThehHow to Cancel D.S.T. Settings End dateSetting the Time Table Program EXT DAYExternal time signal Column Disabled no setting Enabled Follow the steps to set time table programsPrint color 00 Black 01 Red Time to be setPrint in red To set P-01 shown in the tableAbove Print color With P-01 flashing, press Once Lower left of the display Represents print in black PressErase under MO MinuteErase under TU Erase under MO SA Staying lit upExternal 1/60 time signal 1/100 Make the barsUnder MO-SA lit up Print in black1/100To check program settings To modify program settingsTo erase program settings Indication atSEC DS Press Select to cause EXT. Alarm to light up84 !,!2 Resetting Connection Specifications for External Contact Ottom 6IEWScrew Maximum of 8 bells/horns typicalInstalling Ni-Cd Battery optional Error No. appears TroubleshootingOther failures Specifications External time signalTemperature -5˚ to + 45˚C ConnectionTime Card Specifications Semi-Monthly Card Q0086 6120