Lathem 6000E manual Mounting Unit on Wall, Environmental Conditions

Mounting Unit on Wall

The unit can be mounted on a wall using the supplied mounting fittings. To mount the unit on a wall, take the following steps:

1 Install the two larger screws into a wall		(10cm)
10 cm (3.94") apart. Be sure to keep about	.94"
3 mm (0.12") of the screw head out of the	3
wall.
	0.
The supplied screws are intended	(3mm)
	12"

for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off etc.

2Mount the wall mount fittings as shown on the right.

ENGLISH

Environmental Conditions

Avoid placing the unit in environments that are: humid or dusty

exposed to direct sunshine

subject to frequent or continuous vibrations

outside the temperature range between -5˚ and 45˚C affected by chemicals or ozone

6