General Guide
1 | SD Memory Card Slot | Slot for inserting SD memory card. |
|
|
|
2 | Program Key (L) | This key can be assigned any function available. |
|
| |
|
| The default settings are as follows. |
|
| This key is used to read bar codes and 2D code. |
|
|
|
3 | Roll Paper Holder | Roll paper is placed in this holder. Use the optional Paper |
|
| Holder when using a formed sheet paper. |
|
|
|
4 | Splash Protect | Printed roll paper is torn off here. The paper cutter is provided |
| Cover and Paper | with a splash protect cover. Open the cover when printing. The |
| Cutter | paper cutter is revealed when the cover is opened. |
|
|
|
5 | Power Key | Press this key to turn the power on or off. |
|
|
|
6 | Indicator 1 | This indicator is green when charging the battery pack is |
| (Left Side) | completed and red during charging. |
|
|
|
| Indicator 2 | This indicator flashes or lights according to the settings of the |
| (Right Side) | application software. |
|
|
|
7 | Speaker | Generates audio and buzzer tones. |
|
|
|
8 | Brightness Sensor | This sensor detects the brightness of the surroundings. The |
|
| display backlight and key backlight can be controlled |
|
| automatically according to programmed settings. Be careful not |
|
| to inadvertently block this sensor. |
|
|
|
9 | LCD Panel/Touch | Displays text, operations, indicators and so forth. In addition, |
| Screen | operations can be performed and data can be input using the |
|
| stylus provided. |
|
|
|
10 | Stroke Keys | There are a total of 19 keys including function keys and numeric |
|
| keys. Refer to "Key Functions" on page 26 for further details. |
|
| Each numeral and symbol on the key buttons in the table above |
|
| is backlit. |
|
|
|
11 | For connection of a bar code reader and so forth. Connect by | |
| Connector | opening the connector cover. |
|
| |
| M54E2) |
|
|
|
|
12 | Program Key (R) | This key can be assigned any function available. |
|
| |
|
| The default settings are as follows. |
|
| This key is used to read bar codes and 2D codes. |
|
|
|
13 | Power Jack | The AC adaptor is connected to this jack when charging the lithium |
|
| ion battery pack. Open the jack cover to connect the AC adaptor. |
|
|
|
14 | IR Port | This is used for IR data communication with another Handheld |
|
| Printer Terminal or with the Bridge Satellite Cradle. |
|
|
|