Using PC Cards
3.After pushing on both ends of Part A and reattaching to the Handheld Printer Terminal ( 1 ), remove Part B by removing the screws ( 2 ).
1 |
2 |
4.Insert a PC card to which PC card removal tape has been attached. Insert the PC card all the way in so that the top of
the PC card faces the top of the Handheld Printer Terminal. (The illustration shows the Handheld Printer Terminal turned over.) Fold the portion of the PC card removal tape extending from the PC card that is grabbed when removing the PC card so that it does not get in the way when reattaching the Paper Holder.
5.Attach the PC card cushion to Part B of the Paper Holder to immobilize the end of the PC card and prevent it from being dislodged by an impact and so forth. Select the type of cushion (three types are provided) according to the location of the end of the PC card.
Cushion A | Cushion B | Cushion C |
•Position the cushion as shown in the illustration.
•Insert all the way in to the center of Part B.
•Cushion A and Cushion C can be used in combination.
6. Align the grooves of Part B with the projections on both sides of Part A, and then fasten the Paper Holder to the Handheld Printer Terminal using the Paper Holder screws.