Performing a Full Reset (Initialization)
Performing a full reset initializes memory. This means that all data stored in the memory (RAM) is deleted and all the settings are returned to their initial factory settings.
Perform a full reset whenever any one of the following conditions exists.
•When you want to delete all memory contents and return the settings to their initial factory settings.
•When you are no longer able to use the Handheld Printer Terminal because you forgot your password.
•When the Handheld Printer Terminal does not operate normally due to a memory problem.
•When the message “A problem with memory contents has been found. ...” appears.
To perform a full reset
Important!
Performing a full reset deletes all data currently stored in the memory (RAM). If possible, backup data of the Handheld Printer Terminal to a computer, Flash Memory, a memory card, or some other medium before performing a full reset.
1.The message shown below appears on the display when the reset switch is pressed for about 1 second with the stylus while simultaneously pressing the power key and cancel key.
|
|
|
|
|
|
|
|
|
|
the program | the program | |||
key (L) | key (R) | |||
|
|
|
|
|
•To cancel the full reset operation, press the program key (L) instead of the program key (R).
2. Press the program key (R). This causes the message shown below to appear.
|
|
|
|
|
|
|
|
|
|
the program | the program | |||
key (L) | key (R) | |||
|
|
|
|
|
•To cancel the full reset operation, press the program key (L) instead of the program key (R).
3. Press the program key (R) again.
•Full reset is performed, all data in the memory (RAM) are erased and the