Using the Printer
Attaching the 58 mm Paper Width Adjuster
Attach the 58 mm Paper Width Adjuster inside the roll paper holder when using 58 mm wide roll paper. Refer to the procedure described in “Installing the Roll Paper” for information on opening and closing the roll paper holder.
1.Remove the 80 mm Paper Width Adjuster as shown in the illustration.
•Store the 80 mm Paper Width Adjuster in a safe place after it has been
removed.
2.Press the attachments of the 58 mm Paper Width Adjuster from the left and right sides as shown in the illustration.
3. Insert the attachment of the 58 mm Paper Width Adjuster into the mounting holes inside the left side of the roll paper holder to lock in position.
Important!
•Always make sure to attach the 58 mm Paper Width Adjuster when using 58 mm wide roll paper. Failure to attach the 58 mm Paper Width Adjuster may cause the paper to jam or the printer to malfunction.
•58 mm wide roll paper can only be used when the installed application is for use with 58 mm wide paper only.