Casio IT-3000 manual When Using Formed Sheet Paper, Attaching the Paper Holder

When Using Formed Sheet Paper

Attaching the Paper Holder

Attach the separately sold Paper Holder (HA-B93PH) when printing on formed sheet paper. The Paper Holder is composed of four parts and four screws.

In addition, a PC card cushion is enclosed to prevent the PC card from being dislodged by an impact and so forth. Use this card as necessary.

Part C

Part B

Part A PC card cushion

Part D

Screws (4)

1.Check that the power is off. If the power is on, always make sure to turn it off by pressing the power key.

2.Press the ridged ( ) portions ( 1 ) of the splash protect cover while spreading apart the left and right locks ( 2 ) to disengage as shown in the illustration, and then open the splash protect cover ( 3 ).

	1
1	3
	2

2

3. Slide the lock knobs on the left and right
sides of the roll paper holder as shown			2
in the illustration to align at the FREE
position (	2 ), and then push up the		LOCK	FREE
		1	1
ridged (	) portion ( 2 ) to open.
• Please note that the positions of the
lock knobs on the left and right sides		FREE LOCK
are different.
4. Turn over the Handheld Printer Terminal.

E-39