Samsung SP-H710, SP-H700, SP-H500 manual Connecting to VCR/Camcorder/Cable Box, Viewing the picture

Page 23

CONNECTING TO VIDEO EQUIPMENT

Connecting to VCR/Camcorder/Cable Box

Rear side of Projector

S-Video Cable

Video (Composite) Cable

or

VCR

Rear Connection

Camcorder

Cable Box

Connect COMPOSITE (yellow) input port of the projector to the VIDEO OUT (yellow) port of video equipment using the video cable.

■If the video equipment has S-VIDEO OUT port, connect it to S-VIDEOinput port of the projector.

Viewing the picture

COMPOSITE	1 Turn on the projector and press the		Composite
1	COMPOSITE button to select Composite.
S-VIDEO	2 Connect the projector and the video
2	2 Connect the projector and the video
	equipment via S-Video cable and press the
	S-VIDEObutton to select S-Video.
	■ When Composite Mode is not available, check the
	video cables are in place.
		■ Check that the projector and the video
	NOTE	equipment are turned off before connecting
	NOTE	cables.
		cables.

■This projector does not support sound. (Separate audio system is needed for sound.)

Connections and Source Setup Connecting to Video Equipment

23

Image 23

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationCables Rear Side and CablesRear Side Keystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light Installing Projector in Front of the Screen Installation and Turning OnTo Install the Projector Installing Projector on Backside of ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Storage and Maintenance Storage and MaintenanceCleaning the Projector and Lens Cleaning the Inside of the ProjectorPurchasing Optional Parts Purchasing Optional PartsOptional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeStructure of Screen Menu Buttons used for Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementControl Connecting the Projector to a PCTransmission Sequence and Data Format RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only