Samsung SP-H710, SP-H700, SP-H500 manual Test Patterns, Test Pattern Menu

Page 47

Test Patterns

Generated by the projector itself. Utilized as installation basis for better installation of the projector.

MENU

1

Select

2,3,4

/

2,3,4

EXIT

5

Setup

1

Press the MENU button.

The main menu is displayed.

Press the or button to move to Setup.

2The Setup menu is displayed.

Press the button.

Press the or button to move to Test Pattern,

3then press the button.

The Test Pattern menu is displayed.

Press the or button to move to desired

4pattern, then press the button.

The selected pattern is displayed.

5Press the EXIT button to exit the menu.

Test Pattern Menu

Crosshatch

You can check whether the picture is distorted or not.

Screen Size

You can refer to picture format sizes such as 1.33:1

 

 

or 1.78:1.

Color Standard

You can see the change in colours by switching

 

 

between SMPTE_C, HD and EBU Colour

 

Standards. Refer to page 32.

Red

Red Screen, only for color adjustment.

 

Green

Green Screen, only for color adjustment.

 

Blue

Blue Screen, only for color adjustment.

 

White

White Screen, only for color adjustment.

 

6500K_White

White Screen, shows brightest white color possible.

 

 

Setup

 

Install

: Front-Floor

Light Setting

: Theater

V-Keystone

 

Test Pattern

 

PC

 

Factory Default

 

Information

 

MoveEnter Return

Test Pattern

Crosshatch

 

Screen Size

 

Color Standard

Red

 

Green

 

Blue

 

More

 

 

Move

Enter

Return

Test Pattern

More

White

6500K_White

MoveEnter Return

The Crosshatch and Screen Size patterns of

NOTE this projector are provided by JKP (JK Production).

The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may not comply with the actual colors displayed during video playback.

Test Patterns

47

Image 47
Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationCables Rear Side and CablesRear Side Keystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light Installing Projector in Front of the Screen Installation and Turning OnTo Install the Projector Installing Projector on Backside of ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Storage and Maintenance Storage and MaintenanceCleaning the Projector and Lens Cleaning the Inside of the ProjectorPurchasing Optional Parts Purchasing Optional PartsOptional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeStructure of Screen Menu Buttons used for Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementControl Connecting the Projector to a PCTransmission Sequence and Data Format RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only