Samsung SP-H700, SP-H500, SP-H710 manual Selecting and Adjusting Color Temperature

Page 33

Selecting and Adjusting Color Temperature

You can change tint of the entire screen to suit your needs.

MENU

1

Select

2,3,4,5,6

…/†/œ/√

2,3,4,5,6

EXIT

7

Color Temperature Menu

5500K		Used to deliver optimal image quality for
		black-and-white films. Color temperature of
		the picture mode of Movie2 is set to 5500K.
	6500K	This temperature is used for the most video
		productions. It is set as Movie1 when it is
		manufactured, and may deliver the most precise tint.
	8000K	This mode is applied to bright places such as
		showrooms and other sales outlet. Sharpness and
		brightness are enhanced. It is suitable for brighter
		environments and is set to the Dynamic Mode.
	9300K	With both Sharpness and Brightness enhanced, this
		dynamic mode can be effectively used in bright
		ambient light conditions.

Picture Adjustment

1

2

3

4

5 6

7

Press the MENU button.

The main menu is displayed.

Press the ▲ or ▼ button to move to Picture.

The Picture menu is displayed.

Press the button.

Press the ▲ or ▼ button to move to Custom

Picture, then press the button.

The Custom Picture menu is displayed.

Press the ▲ or ▼ button to move to Color

Temperature, then press the button.

The Color Temperature menu is displayed.

Press the œ or √ buttons to select an option then

press the button.

The selected option is applied.

Press the ▲ or ▼ buttons to select an option then

press the button. Press the œ or √ buttons to adjust the selected item.

A separate adjustment window appears for making the adjustment.

Press the EXIT button to exit the menu.

	Picture
Picture Mode		: Movie 1	√
Custom Picture			√
Picture Size		: Full	√
Position			√
DNIe		: Off	√
Film Mode		: On	√
Overscan		: On	√
Move	Enter	Return

			Custom Picture
		… More
		Color Standard : SMPTE_C		√
		Color Temperature		√
		Gamma	: Gamma Mode1 √
		Save		√
	Move		Enter	Return
		Color Temperature
9300K		8000K	6500K	5500K
	Move		Enter	Return

	…
	R-Gain			50
	†

Selecting and Adjusting Color Temperature

33

Image 33

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationRear Side and Cables Rear SideCables Keystone Remote Control ButtonsOperating the Remote Control Inserting Batteries into Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentConnecting to PC Using PC Video Cable or DVI CableViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and MaintenancePurchasing Optional Parts Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementConnecting the Projector to a PC Transmission Sequence and Data FormatControl RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only