Samsung SP-H710, SP-H700, SP-H500 manual Setting up the PC Environment

Page 59

Setting up the PC Environment

1 Click the right mouse button on the Windows wallpaper 1 and click on Properties.

Display Properties tab will appear.

2Click on Settings tab and set the Screen resolution by referring to Resolution described in the display mode

table supported by this projector.

You do not have to change Color quality setup.

3 Press the Advanced button. Another property window will appear.

4 Click on Monitor tab and set the Screen refresh rate by

2

referring to Vertical Frequency described in the display

3

mode table supported by this projector.

 

Set up both the vertical and horizontal frequency instead of Screen refresh rate.

5 Press the OK button to close the window and press the OK 4 button in Display Properties window to close.

The computer might begin restart automatically.

6Shut down the PC and connect to the projector. (Page 60)

 

Process might vary depending on the type of computers or Windows versions.

 

 

This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor.

NOTE

Projected images may differ from the monitor depending on monitor manufacture or Windows versions.

If a band or an unusual signal appears on the projector when PC is turned off or disconnected, switch to Composite mode using the SOURCE button or check that PC is properly connected.

When connecting the projector to PC (including DVI connection), check that PC setup complies to display settings supported by this projector. If not, there may be signal problems.

Connecting to PC

Setting up the PC Environment

59

Image 59
Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationCables Rear Side and CablesRear Side Keystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light Installing Projector in Front of the Screen Installation and Turning OnTo Install the Projector Installing Projector on Backside of ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Storage and Maintenance Storage and MaintenanceCleaning the Projector and Lens Cleaning the Inside of the ProjectorPurchasing Optional Parts Purchasing Optional PartsOptional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeStructure of Screen Menu Buttons used for Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementControl Connecting the Projector to a PCTransmission Sequence and Data Format RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only