Samsung SP-H500, SP-H700 Connecting to the Digital TV Receiver, Connecting to Video Equipment

Page 25

CONNECTING TO VIDEO EQUIPMENT

Connecting to the Digital TV Receiver

Rear side of Projector

DVI Video Cable

Component Cable

or

Digital TV Receiver

(Set-Top Box)

PC Video Cable

Connections and Source Setup

Rear Connection

1signal input terminal of the receiver.Connect antenna cable to antenna

	Connect COMPONENT1 or
	COMPONENT2 (Y/Pb/Pr) port of the
2	projector to Component port of the
2	receiver using Component Cable.

■ If the receiver has DVI or PC OUT port, you can connect it to DVI or PC input port of the projector.

Connecting to Video Equipment

Viewing the picture

COMP.1	1 Turn on the projector and press the COMP.1	Component1
1	button to select Component1.
COMP.2
2	2 Press the COMP.2 button to select
PC	2 Press the COMP.2 button to select
PC	Component2 if COMPONENT2 is connected.
DVI	If the receiver is connected to DVI or PC port,
	If the receiver is connected to DVI or PC port,
	press the DVI or PC button to select DVI or PC	DVI
	respectively.

■ When Component Mode is not available, check that the component cables are in place.

25

Image 25

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationRear Side Rear Side and CablesCables Keystone Remote Control ButtonsInserting Batteries into Remote Control Operating the Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and MaintenanceOptional Parts Purchasing Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementTransmission Sequence and Data Format Connecting the Projector to a PCControl RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only