Samsung SP-H700, SP-H500, SP-H710 manual Indicator Information, Projector and Accessories

Page 9

Indicator Information

: Turned On

: Flashing

: Turned Off

TEMP LAMP

STANDBY

Information

If you press the POWER button on the remote control or projector, the screen appears within 30 seconds.

The projector is in normal operating condition.

The projector is warming up after POWER button has been pressed.

The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off inside of the projector. (Lasts for about 1 minute and 30 seconds)

Refer to measure 1 below if the cooling fan inside the projector is not in normal operation condition.

Refer to measure 2 below if the lamp cover protecting the lamp unit is not closed properly.

Power is turned off automatically when temperature inside of the projector goes beyond the control limit. Refer to measure 3.

Refer to measure 4 below if the life span of the lamp is running out or a problem with the lamp is detected.

Clearing Indicator Problems

Classification

State

Measures

 

 

 

Measure 1

When the cooling fan system is

Unplug and plug the cord and restart the projector. If the

 

not in normal operating condition.

problem does not disappear, contact a dealer or service

 

 

personnel near you.

Measure 2

When the lamp cover protecting

Check the screw on the bottom side of the projector. If you

 

the lamp unit is not properly

do not find any problem, contact a dealer or service

 

closed or the sensor system is not

personnel near you.

 

in normal operating condition.

 

 

 

 

Measure 3

When temperature inside of the

Adjust the position of the projector following the

 

projector becomes too high.

installation instructions of this manual and cool off the

 

 

projector before restarting it. If the problem does not

 

 

disappear, contact a dealer or service personnel near you.

Measure 4

The lamp is malfunctioning after

Power off the projector and cool it off for some time before

 

abnormal power off or restarting

restarting it.

 

right after turning off the projector.

 

 

 

 

 

When brightness of the picture

Check how long the lamp has been used on Information

 

screen degrades or image

and contact a dealer or service personnel near you for lamp

 

deterioration is found.

replacement.

 

This Projector uses a cooling fan system to keep the unit from overheating.

NOTE

Operation of the cooling fan may cause noise, which does not affect the product performance.

No exchange or refund for the noise concern.

 

Preparation

Projector and Accessories

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationRear Side and Cables Rear SideCables Keystone Remote Control ButtonsOperating the Remote Control Inserting Batteries into Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentConnecting to PC Using PC Video Cable or DVI CableViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and MaintenancePurchasing Optional Parts Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementConnecting the Projector to a PC Transmission Sequence and Data FormatControl RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only
Top Page Image Contents