Samsung SP-H500, SP-H700, SP-H710 manual Dvi-D

Page 61

Pin Configuration of PC Video Port Plug

PC Video Cable	DVI-D
(15-pin signal)	(supports only digital signals)

Pin No.	PC Input		Pin No.	Signal	Pin No.	Signal
1	Red (R)		1	T.M.D.S. DATA2-	13	T.M.D.S. DATA3+
2	Green (G)		2	T.M.D.S. DATA2+	14	+5V Power
3	Blue (B)		3	T.M.D.S. DATA2/4 Shield	15	Ground for 5V
4	Ground		4	T.M.D.S. DATA4-	16	Hot Plug Detect
5	Ground (DDC)		5	T.M.D.S. DATA4+	17	T.M.D.S. DATA0-
6	Red (R) Ground		6	Clock (DDC)	18	T.M.D.S. DATA0+
7	Green (G) Ground		7	Data (DDC)	19	T.M.D.S. DATA0/5 Shield
8	Blue (B) Ground	8		No Connection	20	T.M.D.S. DATA5-

9	Reserved	9		T.M.D.S. DATA1-	21	T.M.D.S. DATA5+

10	Ground Sync	10		T.M.D.S. DATA1+	22	T.M.D.S. Clock Shield

11	Ground	11		T.M.D.S. DATA1/3 Shield	23	T.M.D.S. Clock+

12	Data (DDC)	12		T.M.D.S. DATA3-	24	T.M.D.S. Clock-

13Horizontal Sync

14Vertical Sync

15Clock (DDC)

VESA Plug & Play	DVI-D cable does not support
	CAUTION analog RGB signals.

This appliance supports VESA Plug & Play and recognizes connection to PC automatically.

Connecting to PC

Connecting to PC

61

Image 61

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationRear Side Rear Side and CablesCables Keystone Remote Control ButtonsInserting Batteries into Remote Control Operating the Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentUsing PC Video Cable or DVI Cable Connecting to PCViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and MaintenanceOptional Parts Purchasing Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementTransmission Sequence and Data Format Connecting the Projector to a PCControl RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only