Samsung SP-H710, SP-H700, SP-H500 manual Lamp Replacement Procedure

Page 77

Lamp Replacement

Cautions on Lamp Replacement

■Projector lamp requires replacement after.

■Use the recommended lamp when replacing. Lamp specifications are defined in the user’s manual. Replace with the same model provided with the projector.

-Lamp Model Name : LAMP-MERCURY-Philips

-Lamp Manufacture : Philips Lighting

- Lamp Life Time	: 2000Hrs
- Lamp Type	: 250W UHP

- Lamp Part Number : BP47-00010A

■Check that the power cord is unplugged before replacing lamps.

■Wait for at least 30 minutes before replacing lamps to cool off the lamp unit after disconnecting power.

■Lamp is a high-pressure product. Do not place near flammable materials or children.

■Remove dirts or foreign materials around or inside the lamp unit using a proper vacuum device.

■Be careful not to touch the lamp itself when handling the lamp unit.

■If the lamp is poorly handled, it may result in poor picture quality or shorter life time of lamp.

■The projector is will not operate normally if the cover is not locked completely after lamp replacement. Refer to LED information in the user’s manual if the projector does not operate normally.

Lamp Replacement Procedure

1 Detach the screw of the	2 Push to open the lamp	3 Detach the three screws.
lamp cover.	cover in the direction of
	the arrow.

Other Information

Lamp Replacement

4Lift and grip the lamp handle in the direction of the arrow and pull it out.

	5 Reverse the disassembly	■	The Lamp is high-
	procedure to assemble the	■	The Lamp is high-
	procedure to assemble the		temperature high-
	unit after replacement.	NOTE	temperature high-
	unit after replacement.	NOTE	pressure product.
			pressure product.
			Wait for at least 30
			minutes to proceed after
			disconnecting power.
		■	Be sure that the power
			cord is disconnected
			before proceeding.

77

Image 77

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of ContentsFeatures and Design Projector Lamp Page Preparation Front/Upper Side AccessoriesProjector and Accessories Indicator InformationCables Rear Side and CablesRear Side Keystone Remote Control ButtonsOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus AdjustmentUsing Adjustable Feet Leveling with Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before ConnectingViewing the picture Connecting to VCR/Camcorder/Cable BoxPress the COMP.2 button to select Connecting to DVDConnecting to Video Equipment Connecting to the Digital TV ReceiverSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture AdjustmentSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSettings Saving Custom Picture SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizeSupported Picture Sizes Picture Adjustment Selecting Picture SizeScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting V-Keystone Correcting Vertical KeystoneTest Pattern Menu Test PatternsDefault Settings Restoring the Factory Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Display modes supported by this projector Before Connecting to PCSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Menu and Remote Control Installation and ConnectionScreen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and MaintenancePurchasing Optional Parts Purchasing Optional PartsOptional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Procedure Lamp ReplacementControl Connecting the Projector to a PCTransmission Sequence and Data Format RS-232C Connection and Control CommandsSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only