Samsung SP-H710, SP-H700, SP-H500 manual Installation and Connection, Menu and Remote Control

Page 68

Before Contacting Service Personnel

If this projector does not operate properly, check the following first.

If the problem is continues, contact your dealer.

Installation and Connection

Symptoms

No Power.

TroubleshootingNote

Be sure that the power cord in place and the power switch

on the rear side of the projector is turned on "-".

Page 15

Image is distorted or trapezoidal.

Want to install projector on ceiling.

Image is distorted or trapezoidal.

Be sure to make the projection beam perpendicular to the

Pages

screen and adjust the focus using the Zoom Knob and the

16~20

Focus Ring. Avoid to use the V-Keystonefunction if possible.

Ceiling bracket is an optional accessory.

Please contact your dealer.

Be sure that the connection cable (video) is properly

Pages

connected to the proper port. Unless they are connected

Troubleshooting

properly, the device is not available.

23~25

Menu and Remote Control

Before Contacting Service Personnel

Symptoms

Remote control does not work.

Some of Menu functions do not work.

Troubleshooting		Note
■ Be sure that the proper external source is selected.		Page 26
■ Check batteries of the remote control. If there is a		Page 12
problem, replace them with recommended ones.
■ Check the angle and distance between the remote control		Page 13
and the projector. Be sure that there is no obstacle
between the projector and the remote control that may
block the signal.

■Direct lighting of 3-way light bulbs or other lighting device on the remote sensor of the projector may affect the sensitivity and cause the remote control to malfunction.

Refer to the user manual. Some functions are locked	Pages
depending on sources and type of the input signal.	23~26

68

Image 68

Contents Owners Instructions SP-H700/H710/H500 Table of Contents Table of Contents Menu OptionFeatures and Design Projector Lamp Page Preparation Accessories Front/Upper SideIndicator Information Projector and AccessoriesCables Rear Side and CablesRear Side Remote Control Buttons KeystoneOperating Move/Select Button Operating the Remote ControlInserting Batteries into Remote Control Using Remote Control in Dark Place Light Installation and Turning On To Install the ProjectorInstalling Projector on Backside of Screen Installing Projector in Front of the ScreenTurning On Projector Zoom and Focus Adjustment Using the Zoom Knob and the Focus RingLeveling with Adjustable Feet Using Adjustable FeetUsing the Lens Shift Dial Using the Lens Shift DialScreen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Check the following Before Connecting Before ConnectionsConnecting to VCR/Camcorder/Cable Box Viewing the pictureConnecting to DVD Press the COMP.2 button to selectConnecting to the Digital TV Receiver Connecting to Video EquipmentSetting up the External Input Source Setting up the External Input SourceNaming the External Connections Naming the External ConnectionsPage Picture Adjustment Selecting and Adjusting ColorSelecting Picture Mode Selecting Picture ModeCustom Settings of the Picture Custom Settings of the PictureChanging the Color Standard Changing the Color StandardSelecting and Adjusting Color Temperature Selecting and Adjusting Color TemperatureGamma Correction Gamma CorrectionSaving Custom Picture Settings SettingsSetting up DNIe Setting up DNIeSelecting Picture Size Selecting Picture SizePicture Adjustment Selecting Picture Size Supported Picture SizesScreen Position Adjustment Screen Position AdjustmentFilm Mode Film ModeOverscan OverscanStill Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected ImageLight Setting Light SettingCorrecting Vertical Keystone Correcting V-KeystoneTest Patterns Test Pattern MenuRestoring the Factory Default Settings Default SettingsInformation InformationPage Menu Option Setting the Language Setting the LanguageSetting the Menu Position Setting the Menu PositionSetting the Menu Translucency Setting the Menu TranslucencySetting Up the Menu Display Time Setting Up the Menu Display TimeSelecting the Quick Menu Selecting the Quick MenuConnecting to PC Before Connecting to PC Display modes supported by this projectorSetting up the PC Environment Setting up the PC EnvironmentViewing the PC Screen Connecting to PCUsing PC Video Cable or DVI Cable DVI-D Automatic Picture Adjustment Automatic Picture AdjustmentFrequency Adjustment Frequency AdjustmentFine Tuning with the Phase Adjustment Fine Tuning with the Phase AdjustmentZooming the Screen Zooming the ScreenReset the PC Reset the PCTroubleshooting Installation and Connection Menu and Remote ControlBefore Contacting Service Personnel Screen and External SourcePage Other Information Storage and Maintenance Cleaning the Projector and LensCleaning the Inside of the Projector Storage and MaintenancePurchasing Optional Parts Purchasing Optional PartsOptional Parts Select Composite/S-Video/Component Input Mode Structure of Screen MenuButtons used for Screen Menu Structure of Screen MenuSetup Install Structure of Screen Menu Lamp Replacement Lamp Replacement ProcedureControl Connecting the Projector to a PCTransmission Sequence and Data Format Commands RS-232C Connection and ControlSpecifications SpecificationsRemote Control Specifications Remote Control SpecificationsMemo Memo Europe Only