
Control panel overview
display
1
2
3
4
Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short message on a display.
•error LED ![]()
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to solve the problem.
•paper LED ![]()
Blinks when the paper in the tray is empty.
•toner LED ![]()
Blinks when the toner cartridge is almost empty or is not
•paper jam LED ![]()
Lights blink when there is a paper jam in the machine. Check the display message to release the jammed paper.
See page 7.7 about more information on the display messages.
Stops an operation at any time. Also, You can print a machine report by pressing this button for about 4 seconds.
You can power on or off the control panel by pressing and holding this button for a few seconds.
Shows the status of wireless network. When the LED on, the machine is ready.
1.4 <Introduction>