4Press the top cover lever, completely open the top cover.
5Hold the top cover and close it slowly and carefully, until the cover is securely latched.
Note
If the top cover is not completely closed, the machine will not operate.
Caution
Be careful not to pinch your fingers, since the top cover is very heavy.
6If the paper jam LED blinks, go to next step.
7Press the top cover lever, completely open the top cover.
8Grasp the handles on the toner cartridge and pull to remove the cartridge out of the machine.
Caution
• Do not touch the green surface, the OPC drum or the front of the toner cartridge, with your hands or any other material. Use the handle on each cartridge in order to avoid touching this area.
•If you leave the top cover open for more than a few minutes, the OPC drum can be exposed to light. This will cause damage to the OPC drum. Close the top cover should the installation need to be halted for any reason.
Note
If toner gets on your clothing, wipe it off with a dry
cloth and wash it in cold water. Hot water sets toner into fabric.
9Carefully take the jammed paper out of the machine.
Caution
Do not touch the fuser inside the machine. It is hot and could cause burns! The fuser's operating temperature is very hot. Take care when removing paper from the machine.