Samsung ML-1630W Setting Up the Printer, For a Network-connected, Click Add on the Printer List

Page 90

Using SetIP program

This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.

You can only use SetIP program when your machine is connected to a network.

Setting Up the Printer

Set up for your printer will be different depending on which cable you use to connect the printer to your computer—the network cable or the USB cable.

For a Network-connected

SetIP program should be automatically installed during the printer driver installation.

NOTE: If you select Typical installation for a network printer during the printer driver installation, the SetIP program automatically runs after the installation. Follow the below instruction.

1The certificate window appears, click Trust.

2Print the machine’s network information report which includes your machine’s MAC address.

3 Click in the SetIP window to open the TCP/IP configuration window.

4Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.

when you enter the MAC address, enter it without colon(:).

5The machine prints the network information. Confirm all the settings are correct.

6Close the SetIP program.

Starting the program

If you want to change your network printer IP setting, follow the below instruction.

1Print the machine’s network information report which includes your machine’s MAC address.

2Open the Library folder Printers Samsung Your

printer model name SetIP.

3Double click the SetIPApplet.html file.

4When a certificate window appears, click Trust.

5Click in the SetIP window to open the TCP/IP

configuration window.

6 Enter the network card's MAC address, IP address, subnet mask, default gateway, and then click Apply.

when you enter the MAC address, enter it without colon(:).

7The machine prints the network information. Confirm all

the settings are correct.

8Close the SetIP program.

32

NOTE: Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide.

1Follow the instructions on “Installing Software” on page 31 to install the PPD and Filter files on your computer.

2Open the Applications folder Utilities, and Print Setup Utility.

•For MAC OS 10.5, open System Preferences from the Applications folder, and click Print & Fax.

3Click Add on the Printer List.

•For MAC OS 10.5, press the “+” icon then a display window will pop up.

4For MAC OS 10.3, select the IP Printing tab. •For MAC OS 10.4, click IP Printer.

•For MAC OS 10.5, click IP.

5Select Socket/HP Jet Direct in Printer Type.

WHEN PRINTING A DOCUMENT CONTAINING MANY PAGES, PRINTING PERFORMANCE MAY BE ENHANCED BY CHOOSING SOCKET FOR PRINTER TYPE OPTION.

6Enter the printer’s IP address in the Printer Address field.

7Enter the queue name in the Queue Name field. If you cannot determine the queue name for your printer server, try using the default queue first.

8For MAC OS 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your printer name in Model Name.

•For MAC OS 10.4, if Auto Select does not work properly, select Samsung in Print Using and your printer name in Model.

•For MAC OS 10.5, if Auto Select does not work properly, select Select a driver to use... and your printer name in Print Using.

Your printer’s IP address appears on the Printer List, and is set as the default printer.

9Click Add

Using Your Printer with a Macintosh

Image 90
Contents User’s Guide Page Contact Samsung World Wide Country Customer Care Center Web SiteTaiwan Contents Ordering supplies and accessories MaintenanceTroubleshooting SpecificationsAbout this user’s guide Finding more informationSafety and Regulatory Information Important Precautions and Safety InformationOzone Safety Environmental and Safety ConsiderationPower Saver RecyclingFCC Statement for Wireless LAN use United States of AmericaDeclaration of Conformity European Countries Regulatory Compliance Statements Replacing the Fitted Plug for UK OnlyGreen and Yellow Earth Blue Openssl License Viii Special features Special features Machine overview Control panel overviewIntroduction Machine overview Front viewRear view Control panel overview DisplaySoftware overview Supplied softwarePrinter driver features System requirementsMacintosh Operating Requirements recommended SystemSetting up the hardware Getting StartedInstalling the program Setting up the networkUsing SetIP program Supported network environmentsInstalling the software Select Network NameSSID in Ssid Setup Using a wireless networkConfiguring basic network settings Operation Mode is InfrastructureAltitude adjustment Selecting and loading print media Selecting print mediaGuidelines for selecting and storing print media Specifications on print media Type Size Dimensions Weighta CapacitybGuidelines for special print media Media type GuidelinesLoading paper in the tray Changing the paper size in the traySetting the paper size and type Select Printers and FaxesPrinting a document Canceling a print jobBasic printing Double-click the Samsung ML-1630W Series iconCleaning the outside MaintenanceCleaning your machine Cleaning the insideMaintenance Toner cartridge storage Maintaining the cartridgeRedistributing toner Expected cartridge lifeMaintenance Replacing the toner cartridge Maintenance Parts Items Yield AverageTo access SyncThru Web Service Managing your machine from the websiteTips for avoiding paper jams TroubleshootingStatus display Explanation Solution Clearing paper jamsTroubleshooting Rear and inside the machine Troubleshooting Exit area Inner cover Understanding display messages OpenPrinting problems Solving other problemsPaper feeding problems Condition Suggested solutionsCondition Possible cause Suggested solutions Printing quality problems Characters Condition Suggested solutions Curl or waveMisformed SkewCharacter Voids Common Windows problemsCondition Suggested solutions Loose toner Horizontal stripesProblem Suggested solutions Common Linux problemsCommon Macintosh problems Program, click File Print IllustratorSupplies How to purchase Ordering supplies and accessoriesHow to purchase SuppliesPrinter specifications SpecificationsGeneral specifications General specifications Printer specificationsGlossary Control PanelIndex Software section Contents Sharing the Printer Locally Using Your Printer in Linux Installing Printer Software Installing Software for Local PrintingCustom Installation Select Typical installation for a local printer. Click NextSelect Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Installing Printer Software in Windows Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Removing Printer SoftwarePrinting a Document Select your printer driver from the Name drop-down listPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabGraphics Tab ResolutionToner Save Mode DarknessExtras Tab About TabPrinter Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size Creating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Buy NowChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using SetIP programUsing the Unified Driver Configurator Starting the programPrinters Configuration Ports Configuration Configuring Printer Properties Printing a Document Printing from ApplicationsPrinting Files Following four tabs display at the top of the windowInstalling Software Uninstalling softwareSelect Uninstall and click Uninstall Click Add on the Printer List Setting Up the PrinterFor a Network-connected Select Socket/HP Jet Direct in Printer TypeFor a USB-connected Printing a Document Changing Printer SettingsPrinting GraphicsPrinting Multiple Pages on One Sheet of Paper Select the page order from the Layout Direction optionIndex