Condition | Suggested solutions |
|
|
Vertical repetitive | If marks repeatedly appear on the printed side |
defects | of the page at even intervals: |
• Clean the inside of the machine. Contact a service representative to clean the inside of the machine. After cleaning the inside of the machine, if you still have the same problems, install a new toner cartridge of the problem color. See "Replacing the toner cartridge" on page 6.5.
• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.
•The fusing assembly may be damaged. Contact a service representative.
Background scatter Background scatter results from bits of toner randomly distributed on the printed page.
• The paper may be too damp. Try printing
with a different batch of paper. Do not open packages of paper until necessary so that
the paper does not absorb too much
moisture.
• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or in printer properties.
Misformed | • | If characters are improperly formed and | ||
characters |
| producing hollow images, the paper stock | ||
|
|
|
| may be too slick. Try different paper. (See |
|
|
|
| "Specifications on print media" on page 4.3.) |
|
|
| • | If characters are improperly formed and |
|
|
|
| producing a wavy effect, the scanner unit |
|
|
|
| may need service. Contact a service |
|
|
|
| representative. |
|
|
|
|
|
|
|
|
|
|
Page skew | • | Ensure that the paper is loaded properly. | ||
|
|
| • | Check the paper type and quality. (See |
|
|
|
| "Specifications on print media" on page 4.3.) |
|
|
| • | Ensure that the paper or other material is |
|
|
|
| loaded correctly and the guides are not too |
|
|
|
| tight or too loose against the paper stack. |
|
|
|
|
|
|
|
|
|
|
Condition |
| Suggested solutions |
|
|
|
Curl or wave | • | Ensure that the paper is loaded properly. |
| • | Check the paper type and quality. Both high |
|
| temperature and humidity can cause paper |
|
| curl. (See "Specifications on print media" on |
|
| page 4.3.) |
| • Turn the stack of paper over in the tray. Also | |
|
| try rotating the paper 180° in the tray. |
|
|
|
Wrinkles or creases | • | Ensure that the paper is loaded properly. |
| • | Check the paper type and quality. (See |
|
| "Specifications on print media" on page 4.3.) |
•Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Back of printouts | Check for leaking toner. Clean the inside of |
are dirty | the machine. Contact a service |
| representative. |
Black pages | • | The toner cartridge may not be installed | ||
|
|
|
| properly. Remove the cartridge and reinsert |
|
|
|
| it. |
|
|
|
| |
|
|
| • | The toner cartridge may be defective and |
|
|
|
| need replacing. Remove the toner cartridge |
|
|
|
| and install a new one. (See "Replacing the |
|
|
|
| toner cartridge" on page 6.5.) |
|
|
| • | The machine may require repair. Contact a |
|
|
|
| service representative. |
|
|
|
|
|