Calibre UK VANTAGE-HD manual Video input signals only, Mpeg

Page 17

Video Filters

(Video input signals only)

A submenu containing selection options for many image enhancement filters including

CCS Cross Chrominance Suppression filter (reduction of chroma-crawl) CUE Chroma Upsampling Error correction filter

ICP Interlace Chroma Problem filter - Reduces chroma interlace errors on diagonals and curves

TNR Temporal Noise Reduction (removes "electronic" noise found on broadcasts, film material and particularly noticeable on plasma screens; set to High to significantly improve signal to noise ratio on plasmas)

MPEG

Select whether MPEG spider and block noise is on or off and adjusts the level of MPEG noise reduction for SD signals. Not applicable to HD formats – use TNR for removal of all types of noise from HD formats.

Video Filters Menu

Issue 1.0.2

28 March 2006 © Calibre UK Ltd

Page 14 of 30

Image 17

Contents VANTAGE-HD Welcome to the Vantage-HD Manual Copyright & Limited WarrantyContents Product Description Below details the connections to Vantage-HD Connecting VANTAGE-HD to the Display Device Configure Connect PowerSwitch on Output modeSelect display Device resolution Frame Rate Select OutputImage ProjectionPixel Clock and Phase Adjustments Within the Display Optimize Display Device SetupDelay Mode Setting AudioWarp Correction GammaConnecting VANTAGE-HD Inputs Reset Channel Freeing Input Channels Selecting AN Input Pixel Clock & Phase Adjusting AN InputMpeg Video input signals onlyInput gamma mode Color temperatureBlack Level Input CaptureSelecting the input Picture in PicturePositioning the PIP OSD not visiblePicture In Picture Menu Issue Vantage-HD Information Vantage revision Information MenuInput Source Input FormatConfiguration Menu Factory Reset 0SD TimeoutInfoscreen Timeout VBP Output Mode DetailsPage NTSC, PAL, Secam Input Signal DetailsPage Power Supply Specification Regulatory Approvals Safety Warning Environmental and SafetyHdmi Connection Advice Issue Warranty & Service Advice