Calibre UK VANTAGE-HD manual Input Signal Details, NTSC, PAL, Secam

Page 26

INPUT SIGNAL DETAILS

11.1.Introduction

This section provides technical details for all possible inputs please refer to the model specification to determine which inputs can be displayed by your Vantage-HD.

11.2.Video Inputs

Composite via RCA jacks

S-Video via 4-way mini DIN socket

Signal formats

Composite (CVBS), S-Video (Y/C), Standards

 

NTSC, PAL, SECAM

Composite (CVBS) input level

1V p-p nominal inc. sync

Luminance (Y) input level

1V p-p nominal inc. sync

Chrominance (C) input level

0.6V p-p nominal

Input Impedance (all inputs)

75 Ohms

11.3.Component Video Input Via 3 or 5 RCA jacks

YPbPr, YPbPrS, RGB and RGB(S) component video

Signal formats 484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and 1080p at 24, 25 and 30Hz.

Please note this input does not support Computer SVGA signals which should be connected via the Computer SVGA input

11.4.SDI Input (optional)

Format:

SD-SDI and HD-SDI YCbCr 4:2:2 serial digital component video

Input impedance:

75 ohms.

SMPTE 292M and SMPTE 259M-C compliant

11.5.HDMI Input

HDMI format 1.1 with HDCP Signal formats

484i and 576i (SD), 480p, 576p (ED), 720p, 1080i at 50, 59.94 and 60Hz and 1080p at 24, 25 and 30Hz

 

1080p at 50 and 60Hz

 

 

11.6.

Computer (SVGA) Inputs

 

 

 

Signal formats: DOS

720 x 400

70Hz

 

VGA

640 x 480

60Hz to 75Hz inclusive

 

SVGA

800 x 600

56Hz to 75Hz inclusive

 

XGA

1024 x 768

60Hz to 75Hz inclusive

 

WXGA

1280 x 768

60Hz to 75Hz inclusive

 

SXGA

1280 x 1024

60Hz

 

RGB video level

0.7V - 1.0V

 

 

RGB input impedance

75 Ohms

 

 

Sync formats

 

 

1.Separate H & V sync at TTL levels.

Issue 1.0.2

28 March 2006 © Calibre UK Ltd

Page 23 of 30

Image 26
Contents VANTAGE-HD Copyright & Limited Warranty Welcome to the Vantage-HD ManualContents Product Description Below details the connections to Vantage-HD Connecting VANTAGE-HD to the Display Device Switch on Connect PowerConfigure Output modeSelect display Device resolution Image Select OutputFrame Rate ProjectionOptimize Display Device Setup Pixel Clock and Phase Adjustments Within the DisplayWarp Correction Setting AudioDelay Mode GammaConnecting VANTAGE-HD Inputs Reset Channel Freeing Input Channels Selecting AN Input Adjusting AN Input Pixel Clock & PhaseVideo input signals only MpegBlack Level Color temperatureInput gamma mode Input CapturePositioning the PIP Picture in PictureSelecting the input OSD not visiblePicture In Picture Menu Issue Input Source Information MenuVantage-HD Information Vantage revision Input FormatConfiguration Menu Factory Reset 0SD TimeoutInfoscreen Timeout Output Mode Details VBPPage Input Signal Details NTSC, PAL, SecamPage Power Supply Specification Regulatory Approvals Environmental and Safety Safety WarningHdmi Connection Advice Issue Warranty & Service Advice