Calibre UK VANTAGE-HD manual Reset Channel

Page 13

Definition of that video input channel is now complete

You should now repeat steps 16 to 18 to the define all the remaining video and audio channels you wish to use. When you have finished defining input channels, exit the Input Connections menu using the left navi-key to move back to the main menu on the left of the

OSD

3.2. Resetting An Input Channel

Reset Channel

This very useful function resets all the input parameters to the default settings for that input channel with the current selected display device type. This enables you to recover to known settings

Input Setup Menu

Issue 1.0.2

28 March 2006 © Calibre UK Ltd

Page 10 of 30

Image 13

Contents VANTAGE-HD Welcome to the Vantage-HD Manual Copyright & Limited WarrantyContents Product Description Below details the connections to Vantage-HD Connecting VANTAGE-HD to the Display Device Configure Connect PowerSwitch on Output modeSelect display Device resolution Frame Rate Select OutputImage ProjectionPixel Clock and Phase Adjustments Within the Display Optimize Display Device SetupDelay Mode Setting AudioWarp Correction GammaConnecting VANTAGE-HD Inputs Reset Channel Freeing Input Channels Selecting AN Input Pixel Clock & Phase Adjusting AN InputMpeg Video input signals onlyInput gamma mode Color temperatureBlack Level Input CaptureSelecting the input Picture in PicturePositioning the PIP OSD not visiblePicture In Picture Menu Issue Vantage-HD Information Vantage revision Information MenuInput Source Input FormatConfiguration Menu Infoscreen Timeout 0SD TimeoutFactory Reset VBP Output Mode DetailsPage NTSC, PAL, Secam Input Signal DetailsPage Power Supply Specification Regulatory Approvals Safety Warning Environmental and SafetyHdmi Connection Advice Issue Warranty & Service Advice