Product Description

1.1.Product Overview

Vantage-HD is a state of the art digital image processor which provides market leading HD& SD per-pixel multiple Iow-angle aperture-adjusted motion-adaptive de-interlacing and automatic film pull-down correction for 3:2, 2:2 and non-standard and broken cadences, significantly outperforming the capabilities of benchmark competitor products.

Vantage-HD features studio-grade image processing algorithms from Teranex for the very best scaling, film and video noise reduction, MPEG artifact reduction and automatic audio time-line correction to maintain lip-syncVantage-HD is a very flexible video and audio router with multiple HDMI and analog input channels, digital, analog and optical audio support and optional HD- SDI compatibility.

Vantage-HD has special algorithms for plasma image enhancements, significantly reducing plasma noise and improving grayscale reproduction. Image quality on large-screen LCDs are also much improved by Vantage-HD. For projectors, Vantage-HD features the sharpest most flexible keystone correction on the market and there is also an image warping option available for complex geometric correction

1.2.Packing List

The following items are included with your Vantage-HD, if any items are missing please contact your distributor.

1.Vantage-HD

2.Power supply

3.Power cord

4.CD containing this manual

5.Remote control + batteries

6.Warranty card

1.3.You Will Need

The following items will be required but are not supplied with your Vantage-HD

1.A suitable display device - see section 17 for details of the output modes supported by Vantage-HD

2.Cable to connect to your display device

3.A signal source - see section 11 for details of the supported inputs

4.Cable to connect to your signal source

5.Audio processor and cable (required if not using HDMI to connect to the display device).

1.4.Physical Dimensions

The Vantage-HD is approximately 16.4" (416mm) by 10" (253mm) by 3.4" (85mm) WxDxH NOTE dimensions are excluding optional rack mounting kit.

An optional 19" by 2U rack mounting kit is available. Each bracket is attached by 2x 10-32 1/2" long pan head screws.

1.5.Controlling Your Vantage-HD

Setting up and controlling your Vantage-HD is achieved by a simple to use On Screen Display (OSD), moving around the OSD can be achieved by using the navi-keys on the front of the Vantage-HD or by using the remote control

Batteries are not installed when the unit ships to maximise their life.

PLEASE ENSURE THAT THE BATTERIES ARE INSERTED IN THE WAY SHOWN WITHIN THE BATTERY COMPARTMENT OF THE REMOTE CONTROL.

WHEN BATTERIES BECOME DISCHARGED PLEASE REMOVE THEM IMMEDIATELY AND DISPOSE OF THE IN ACCORDANCE WITH THE INSTRUCTIONS SUPPLIED BY THE BATTERY MANUFACTURER

Issue 1.0.2

Page 1 of 30