TAKING PHOTOS
Now let's take a picture.
1 To switch on the camera, press the POWER button ( 
)
The beep is activated whenever the power is turned on.
The indicator ( 
) on the LCD panel and the condition indicator lamp(green) next to the viewfinder blink while the camera is getting ready for the operation, and they go out when the camera is ready for shots.
BASIC
2 Select the desired mode (Macro or Normal) according to picturing range by using the mode dial ( 
) on the top of a camera.
Macro ( 
) : between 0.2m ~ 0.8m
Normal ( 
) : photography range 0.8m ~ infinite
Note
You will not be able to obtain a clear shot of an object if you do not select the correct shooting mode (normal / macro) according to the distance from the object to the camera.
Avoid obstructing the Flash fading control sensor when you take a picture. A picture can be spoiled when a finger, hair or camera strap is in front of the Flash fading control sensor.
3 Select the suitable image quality and recording size with the SCROLL button( 
), the SELECT button( 
) without LCD monitor.
Refer to the page 28 ~ 35 about the shot mode using the LCD panel.
25