SETTING UP SHOOTING FUNCTION
Indicator for the number of the remaining shot, condition of the card and other information
According to the condition of the camera and memory card, it is shown on LCD panel as below
camera condition indicator
( 
) Indicator on LCD panel blinks if you press the power button
- ( 
) Indicator is canceled when the camera is ready for the operation.
When the memory card is set up properly.
Number of available shots remaining is determined by the picture selected and image resolution. - The maximum available pictures will be 9999(subject to memory size and picture quality).
When the memory card is not set up properly |
| |
( | ) symbol flashes on the location of available shot indicator. | |
- If there is no card, a beep will sound |
| |
When a memory card is set and there is short capacity |
| |
symbol ( | ) will flash on the location of available shot indicator. | |
- If the sound function is on, the card memory capacity short warning will sound | ||
When you are saving the *.tif file form image in the memory card | ||
The ( | ) indicator blinks on the LCD panel |
|
- When the saving to the memory card is completed, the ( | ) indicator is canceled. | |
Indicator for the camera error
When the error occurs while the operation of the camera, the indicator ( 
) on the photographing information indicator blinks. Refer to the page 70 about the detail information about the occurrence of the error.
Reference
When the memory capacity is low, it will not be possible to take a picture.
A warning will sound regarding low memory or no card, and will sound in the following events.
When you have pressed the shutter button.
When you have used mode dial.
35