SETTING UP SHOOTING FUNCTION
STAMP
For DATE/TIME to appear on a still image
The DATE/Time function will only work in Single and Interval shooting mode. It will not work in Continuous and Moving Image modes.
There are three options
OFF : DATE/TIME won be recorded on still images(Default)
DATE\TIME : Both DATE / TIME is recorded on a still image
DATE : Only the DATE is recorded on a still image
DATE is indicated in the following order [year.month.day]
TIME is indicated in the following order[hour : minute : second] and the hour digit counts up to 24. DATE/TIME will be displayed on the lower right hand side of image
B A S I C
<Selecting the DATE> | <Selecting the DATE/TIME> |
Reference
The DATE that is set in DATE.TIME SET(refer to page 53) will be recorded on the still image. The setting is saved even if the camera power is off.
48