TAKING PHOTOS
Reference
If there is insufficient memory available.
The [ 
] mark is blinked on the LCD panel.
If you press halfway the shutter button for the shot when LCD monitor is on, the following message is displayed.
CARD IS FULL!
INSERT
NEW CARD
If you want to use the LCD monitor, simply press the LCD button.
If the beep is on, the card capacity short warning sounds
To optimise the amount of memory on the camera, replace the memory card or delete unnecessary images stored on the memory card.
4 Set up the picture function by using the LCD panel and the menu screen on the LCD monitor. Refer to the page 37 ~68 about the selecting the shooting function using the menu screen on the LCD monitor.
5 Decide the picture composition that you want to achieve by using the optical viewfinder or the LCD monitor. In macro shot mode, you should compose your picture composition using the LCD monitor.
Note
Extensive use of the LCD monitor to view the potential picture will drain the batteries in a short period of time. To safeguard against this, please use the optical viewfinder.
6 When taking pictures, squeeze the shutter button gently to avoid camera shake.
If you press the shutter button down halfway, the autofocus will be activated and the status of the flash will show.
If you press the shutter button down fully, the picture will be taken and the data regarding the picture will be stored.
26