Samsung 4200 manual Reinstalling Printer Software, Removing Printer Software

Page 60

Reinstalling Printer Software

You can reinstall the software if installation fails.

1Start Windows.

2From the Start menu select Programs or All Programs your printer driver name Maintenance.

3Select Repair and click Next.

You will see a component list so that you can reinstall any item individually.

NOTE: If your printer is not already connected to the computer, the following window will appear.

After connecting the printer, click Next.

If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

The reinstallation window that appears in this User’s Guide may differ depending on the printer and interface in use.

4Select the components you want to reinstall and click Next.

If you you select your printer driver name and reinstall the printer software for local printing, the window asking you to print a test page appears. Do as follows:

a.To print a test page, select the check box and click Next.

b.If the test page prints out correctly, click Yes. If it doesn’t, click No to reprint it.

5When the reinstallation is done, click Finish.

Removing Printer Software

1Start Windows.

2From the Start menu select Programs or All Programs your printer driver name Maintenance.

3Select Remove and click Next.

You will see a component list so that you can remove any item individually.

4Select the components you want to remove and then click Next.

5When your computer asks you to confirm your selection, click Yes.

The selected driver and all of its components are removed from your computer.

6After the software is removed, click Finish.

6

Installing Printer Software in Windows

Image 60
Contents Page Page Contact Samsung Worldwide Contents 10.1 10.2Important Precautions and Safety Information Use only No.26 AWG or larger telephone line cordPower Saver Approvals and Certifications EC CertificationPage Special features IntroductionRear cover Power receptacle USB port Power switch Understanding component locationsFront view Rear viewControl panel functions SCX-4200Getting started Finding more informationInstalling the toner cartridge Selecting a locationLoading paper Changing the size of the paper in the paper input tray Making connections Turning the machine onUsing the save modes Toner save modePower save mode Overview of control panel menusPrinter driver features Supplied printer softwarePrograms for windows Linux driverSystem requirements RequirementsLoading original documents and paper Loading documentLoading original documents and paper Type Size Dimensions Weighta Selecting print materialsSupported paper types and sizes Paper size supported in each mode Type Size Dimensions Weighta CapacitybMode Size Source Guidelines for selecting and storing print materialsPaper Type Guidelines Paper input tray Manual feederSetting the paper size and type Tips on using the manual feederSelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Take the paper out manuallyBe careful not to pinch your fingers Changing the settings for each copy CopyingCopying Changing the default settings Using special copy featuresAuto Fit copying ID Card copyingSetting the time out option UP copyingPoster copying Canceling a print job Basic printingPrinting a document This chapter explains common printing tasksScanning Scanning basicsScanning How to purchase Ordering toner cartridgeToner cartridges Type Yield a Part number Standard Pages SCX-D4200AMaintenance Cleaning your machinePrinting reports Clearing memoryCleaning the drum Cleaning the scan unitIf the problem remains, repeat steps 1 through Maintaining the toner cartridge Redistributing the toner cartridgeStatus LED blinks red Consumable and replacement parts Replacing the toner cartridgeItems Yield Average Troubleshooting Clearing paper jamsMessage Location of Jam Go to Paper Jam Paper input tray Below Open/Close DoorFuser area or around the toner cartridge Paper exit areaUnderstanding the Status LED Tips for avoiding paper jamsStatus Description Solving other problems Paper feeding problemsDisplay Meaning Suggested solutions Condition Suggested solutionsPrinting problems ConditionSoftware Section Press Menu until Machine Setup Printing quality problems Condition Suggested solutions Light or fadedPrint Misformed If characters are improperly formed Characters SkewCurl or wave Wrinkles orCopying problems Scanning problemsCurl Common windows problems Common Linux ProblemsInstalled both Linux Simultaneous access of different consumer MFP driver onSimultaneously, please install the LPP first Following commandCommon macintosh problems Software. See Software SectionSpecifications General specificationsScanner and copier specifications Duty cycle Monthly print Up to 10,000 pagesPrinter specifications 10.2ID card, special copy 4.2 installing, toner cartridge Linux problems 9.10 loading documentsClone, special copy 4.2 component location 1.2 connection Up 4.3 auto fit 4.2 clone 4.2 darknessScanning 6.1 software overview General 10.1 paper 3.2 printerSystem requirements Windows Software section Contents Sharing the Printer Locally Using Your Printer with a Macintosh Installing Printer Software in Windows Installing Printer SoftwareInstalling Printer Software in Windows Reinstalling Printer Software Removing Printer SoftwarePrinting a Document Select your printer driver from the Name drop-down listMake sure that your printer is selected Printer Settings Layout TabPaper Orientation Select Printers and Faxes Select your printer driver iconPaper Tab SourceScaling Printing Resolution Toner Save ModeGraphics Tab DarknessExtras Tab About TabPrinter Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size Using Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlaySetting Up a Host Computer Setting Up a Client ComputerCheck the Share this printer box Select Local Port and click New PortOpening the Troubleshooting Guide Understanding Smart PanelToner Level Changing the Smart Panel Program Settings Scanning Using Samsung SmarThru Uninstalling Samsung SmarThruUsing Samsung SmarThru Scanning Process with TWAIN- enabled Software Scanning Using the WIA DriverUsing Onscreen Help File Installing the MFP Driver Getting StartedSystem Requirements Installing the MFP Driver Using the MFP Configurator Uninstalling the MFP DriverOpening the MFP Configurator Click UninstallPrinters Configuration Scanners ConfigurationPrinters Tab Classes TabConfiguring Printer Properties MFP Ports ConfigurationSharing Ports Between Printers and Scanners Available portsPrinting from Applications Printing FilesFile menu Scanning a Document Click PropertiesClick your scanner Drag the pointer to set the image area to be scannedUsing the Image Editor Adding Job Type SettingsUse these tools to edit the image Installing Software for Macintosh Install the Printer driverUninstalling the Printer driver Double-click the Samsung SPL2 Installer iconSetting Up the Printer Install the Scan driverUninstalling the Scan driver For a Network-connected MacintoshChanging Printer Settings Layout SettingPrinting Printing a DocumentPrinter Features Setting ResolutionQualityPrinting Multiple Pages on One Sheet of Paper Paper TypeScanning Index Macintosh 31 uninstall Windows Rev