10When you are finished, click Save on the toolbar.
11Select the file directory where you want to save the image and enter the file name.
12Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later scanning.
To save a new Job Type setting:
1Change the options from the Scanner Properties window.
2Click Save As.
3Enter the name for your setting.
4Click OK.
Your setting is added to the Saved Settings
To save a Job Type setting for the next scan job:
1Select the setting you want to use from the Job Type drop- down list.
2Click Save.
The next time you open the Scanner Properties window, the saved setting is automatically selected for the scan job.
To delete a Job Type setting:
1Select the setting you want to delete from the Job Type
2Click Delete.
The setting is deleted from the list
Using the Image Editor
The Image Editor window provides you with menu commands and tools to edit your scanned image.
Use these tools to edit the image.
30
Using Your Printer in Linux
You can use the following tools to edit the image:
Tools | Function |
|
|
Saves the image.
Cancels your last action.
Restores the action you canceled.
Allows you to scroll through the image.
Crops the selected image area.
Zooms the image out.
Zooms the image in.
Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically, or horizontally.
Allows you to rotate the image; you can select the number of degrees from the drop- down list.
Allows you to flip the image vertically or horizontally.
Allows you to adjust the brightness or contrast of the image, or to invert the image.
Shows the properties of the image.
For further details about the Image Editor program, refer to the onscreen help.