Hardware requirement
1.Turn off both your machine and PC.
2.Connect your machine and PC with the printer cable
0 |
|
0 | 0 |
00 |
3.Connect one end of the telephone line cord supplied to the LINE jack on the rear of the machine, then connect the other end of the cord to the standard phone wall jack.
4.If your computer modem uses the same phone line, connect one end of the supplied saperated telephone line cord to the EXT. jack on the rear of your machine, then connect the other end to the line jack of the internal/external PC modem.
5.Turn on all the machines.
Notes:
•You must use the internal computer modem or an external modem for sending or receiving
•If Windows 95/98 users see the “New Hardware Found” screen when your computer turns on, close it by clicking Cancel.
Installation
Installing SmarThru software 1.3