Samsung SF-5100P manual Lite, Tools toolbar

Tools toolbar

The buttons on this toolbar are used to work with blocks and available only when the image window is active.

Button	Function	Menu equivalent
	Allows you to create blocks. Select	Image → Choose a Tool
	this button and draw a block with	→ Create Text Block
	the mouse. This block is a text by
	default. The block type can be
	changed by right-clicking in the
	block and selecting Block Type
	from the pop-up menu.
	Allows you to add a part to the	Image → Choose a Tool
	active block. Click the mouse	→ Add Block Parts
	inside the block where you want
	to draw a part. Then drag it
	diagonally out of the block, and
	release the mouse. The block gets
	the additional projection.
	Allows you to remove a part from	Image → Choose a Tool
	the active block. Click the mouse	→ Cut Block Parts
	near the block where you want to
	cut a part of the block. Then drag
	it diagonally inside the block, and
	release the mouse. The block gets
	the additional projection.
			Using
	Allows you to move a selected	Image → Choose a Tool
	block. Click inside the block and	→ Move Blocks
	drag wherever necessary.		AnyPage
	Allows you to renumber blocks.	Image → Choose a Tool
	After choosing this button, click	→ Renumber Blocks
	the blocks in the sequence you
	want them to appear in the output		Lite
	text (beginning with the first one).
	Allows you to delete blocks.	Image → Choose a Tool
		→ Delete Blocks
	Allows you to add vertical lines to	Image → Choose a Tool
	the table block.	→ Add Vertical Line to Table
	Allows you to add horizontal lines	Image → Choose a Tool →
	to the table block.	Add Horizontal Line to Table
	Allows you to delete lines in the	Image → Choose a Tool
	table.	→ Remove Line from Table

Using AnyPage Lite 4.13