JVC RM-P210 manual System Reset Menu, Initial values, Status Setting Initial Values

MENU OPERATION

SYSTEM RESET MENU

This menu resets the values set by the user to the initial values.

FULL AUTO	F1	SHUTTER	F3	MENU/SHUTTER		GAIN	P
						STEP
	STR	1/1000	ALC			HIGH
					SHUTTER	VARIABLE	MID
	CMP	+9dB	LUX
BARS				MENU	PUSH-ON	PUSH-ON	R
	F2		F4			LOW
		GAIN
M					DOWN UP	DOWN UP
						Control knob
	LCD display		MENU button

1.	6: LCD MODE
	7: SYSTEM RESET

2.7A: SYSTEM RESET

			CANCEL
3.
	7A: SYSTEM RESET
			CANCEL
4.
	7A: SYSTEM RESET
			OK
5.
	STR	OFF	ALC
	CMP	0dB	LUX

1. Press and hold the MENU button (approx. 1 second) until the LCD display shows the menu display.Then turn the con- trol knob to move the cursor () to "7: SYSTEM RESET".

2. Press the control knob to display "7A: SYSTEM RESET".

3. Press the control knob to move the cursor () to "CAN- CEL". If you do not want to reset the values you have set, press the control knob now.

4. If you want to reset the values, turn the control knob to move the cursor () to "OK".

5. Press the control knob to reset the values you have set to the initial values and return to the normal display.

Initial values

●The values you've set in the menu items will be reset to the initial values shown on pages 21 to 27.

●Other status settings are reset as shown below.

	Status Setting		Initial Values		Status Setting	Initial Values
IRIS button			MANUAL	GAIN	STEP switch	Switch position
	W.BAL switch		Switch position		V.GAIN LEVEL	0.1 dB
	PAINT button		OFF	SHUTTER	SHUTTER	OFF
		A	Bch		V.SCAN LEVEL	Approx. 1/100
			Central value of the control
				FULL AUTO		OFF
WHITE	WHITE PAINT		Rch
		B	Bch	BARS		OFF
			Central value of the control
				F1 to F4 buttons		Initial value, OFF
			Rch
	MANUAL PAINT		Bch	LOLUX		OFF
			Central value of the control
			Rch	ALC+EEI		OFF

27