JVC RM-P210 manual Genlock Menu, Cable Menu

MENU OPERATION

GENLOCK MENU

This menu is used to set the camera cable length to the length actually used.

(

REF.

: “Adjustments for Genlock Operation” on page 13.)

No.	Item	Function, Operation	Available Settings	Initial Setting
1A	H PHASE	Adjustment of the Horizontal sync phase of genlocking.	0 to 255	128
1B	SC COARSE	Coarse adjustment of the color phase of genlocking.	0°, 90°,	0°
		Use a vectorscope, etc.	180°, 270°
1C	SC FINE	Fine adjustment of the color phase, which should be performed	0 to 255	128
		after completing the SC COARSE adjustment.
		If the subcarrier cannot be adjusted with SC FINE, restart the
		adjustment from SC COARSE.
1Z	BACK	Return to the previous display.	–	–

CABLE MENU

This menu sets the camera cable length according to the actual length used.

(

REF.

: “Camera Cable Length Setup” on page 12.)

No.	Item			Function, Operation	Available Settings	Initial Setting
2A	LENGTH	Set according to the total length of the camera cables in use.			5M, 20M,	20M
					50M, 100M
2B	Y CABLE EQ	Fine adjustment of the luminance signal.			-128 to	NORMAL
					NORMAL to
					127
2C	C CABLE EQ	Fine adjustment of the chrominace component.			-128 to	NORMAL
					NORMAL to
			NOTE
					127
		This adjustment causes the phase to be altered. Be sure to
		adjust SC FINE after this adjustment.

2Z

BACK

Return to the previous display.

–

–

21