JVC RM-P210 manual Troubleshooting, Check the Camera

GENERAL

TROUBLESHOOTING

Symptom Check Points Page

	Colors in the monitor screen	• Is the SC phase adjusted properly?	P. 13
	are abnormal. (During
Video	genlocking)
troubles Synchronization is not		• Are the BB or VBS signals applied to the GENLOCK INPUT	P. 13
	possible.	connectors?
		• Is the VCR playback signal supplied directly without passing
		through a TBC?
	Pressing the corresponding	• Functions that are not available on the camera cannot be
	button cannot start the	controlled.
	operation.	Check the camera functions again.
	<EXT> is displayed on the LCD.
	The LCD display keeps on	• Are cables connected properly?	P. 8
	displaying "NOW INITIALIZING	• Are the power switches of the RM-P210 and camera set to ON?
	JUST A MOMENT" or "PLEASE • Is the MODE (RM/VTR) switch on the camera adapter set to
	CHECK THE CAMERA".	“RM”?
	LCD display shows "---".	• The connected camera does not have the assigned function.	P. 25
		Check the camera functions again and assign the proper
		functions to the F1 to F4 keys.
Control	White-balance adjustment	• Is the W.BAL switch set to A or B?	P. 18
	cannot be started.	• Is FAS or FAW ON (which is indicated by the lighting of the AUTO
troubles
		lamp)?
	White-balance adjustment will	• Are the color temperature filters and lighting conditions appropriate?	P. 18
	not complete.	• Does the object have colors?
	The tally lamp does not light.	• Is the tally system of the RM-P210 compatible with that of the	P. 14
		camera system?
		The RM-P210 has been set at the factory in the “make contact
		mode”. If it is required to set it to the “voltage supplied mode”, the
		setting of the internal circuitry should be changed; consult your
		nearest JVC-authorized service agent. (The modification will then
		be carried out with charge.)
	Intercom is not possible.	• Is the headset impedance suitable? (Earphone: 50 W to 300 W/	P. 14
		1 kHz. Microphone: Carbon).

30