5 PROGRAMMING
MELSEC-A
Sets 256 points.
Setting of automatic refresh parameters
Dedicated instruction (RRPA)
Starting I/O number of master module
Parameter storage starting device
Reads data link status.
Checking of AJ65SBT
Initial settings
Read of digital values
Processing at error occurrence
User designation
User designation
Error LED
CH.1, CH.2: A/D conversion enabled
CH.1: 0 to 5V
CH.2: User range setting 1
CH.2 moving average processing count:
16 times
Turns on CH.2 moving average processing specifying flag.
Turns on initial data setting request flag.
Turns off initial data setting request flag.
Reads CH.1 digital value.
Reads CH.2 digital value.
Reads error.
Turns on error reset request flag.
Turns off error reset request flag.
Masks disabled devices.
Masks RY100 to RY10F disabled devices.
Masks RY110 to RY11F disabled devices.
5 - 11