JVC TH-A55, TH-A85 Program Playback, Advanced operations Press 3 play button to start Program

Advanced operations

	6 Press 3 (play button) to start Program
Program Playback
	Playback.

You can play up to 99 tracks in any order. You may program the same track more than once.

(play button)

Cursor (3/2///5)

/ENTER

Number buttons

7While stopped

1 Press ON SCREEN twice.

The on-screen bar appears on the TV screen.

2 Press Cursor 3/2 to move Hto . 3 Press ENTER.

The program menu appears on the TV screen.

• 10 orders appear at a time.

4 Press number buttons (1-10, +10) to specify selections by track.

•At each program order use number buttons to specify track number.

Example:

To specify “track 3”: Press 3.

When all of the programmed tracks have been played back, playback stops and the program menu appears again. Note that program setting remains.

When playing back an Audio CD:

The program menu remains on the TV screen during Program Playback.

To check the program contents

During playback, press 7. Playback stops and the program menu appears.

To bring up the menu without stopping playback, carry out steps 1 to 3.

•You can also check playback status in the on-screen bar by pressing ON SCREEN.

To stop Program Playback

Press 7. Note that program setting remains.

To clear the program

While stopped and the program menu is shown on the TV screen, press 7.

All of the programmed tracks are erased. You can also clear the program by turning off the system.

To quit the Program mode

After clearing all programmed tracks, press 3(play button). The program menu disappears.

NOTE

•During Program Playback, you cannot edit program contents.

•During Program Playback, pressing ¢skips to the next program selection. Pressing 4returns playback to the beginning of the current selection.

•The Resume function cannot be used with Program Playback.

•To close the program menu:

Press ON SCREEN. The program menu is closed and the on-screen bar is shown.

•To turn off the on-screen bar: Press ON SCREEN repeatedly.

•Program Playback function cannot be used during Video CD/SVCD playback with PBC function.

•If you want to repeat the programmed tracks, set the Repeat mode during Program Playback. (A pg. 44)

•Program Playback may not work for some discs.

5 Repeat step 4 to program following orders.

Each time you enter a track number in the order at the bottom of the program menu, the program menu scrolls and the following orders appear.

To erase an order

Press Cursor //5to move Hto the order to be erased, then press CANCEL.

43