References
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
No sound. | The system cord and/or speaker cord is not connected. | Check the connection. (A pg. 10 – 13) |
|
|
|
| There is a short in the speaker cord. | Reconnect the speaker cord. |
|
|
|
| The audio cord is not connected to AUDIO IN (VCR) | Connect the cord correctly. (A pg. 14) |
| and/or DIGITAL IN (DBS) correctly. |
|
|
|
|
| An incorrect source has been selected. | Select the correct source. (A pg. 20) |
|
|
|
| Muting is on. | Press MUTING to cancel muting. (A pg. 20) |
|
|
|
| The decode mode is not set correctly. | Select the proper decode mode. (A pg. 22) |
|
|
|
Sound from one front | The speaker cord is not connected correctly. | Connect the speaker cord correctly. (A pg. 10) |
speaker only. |
|
|
Adjust the balance properly. (A pg. 49, 54) | ||
|
|
|
No sound from the | The speaker setting is incorrect. | Set the speaker setting properly. (A pg. 50, 54) |
center and/or surround |
|
|
speakers. |
|
|
|
|
|
Bass sound is heard | Appropriate bass level for stereo sound is not selected. | Set “AUDIO POS” properly. (A pg. 54) |
reinforced when |
|
|
listening in stereo. |
|
|
|
|
|
DVD Playback
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
No picture is displayed | The video cord is not connected correctly. | Connect the cord correctly. (A pg. 8) | |
on the TV screen. |
|
| |
TV input selection is incorrect. | Select the correct input on the TV. | ||
| |||
|
|
| |
| The disc is not playable. | Use a playable disc. (A pg. 3) | |
|
|
| |
No picture is displayed | The scan mode is set to “PROGRESSIVE” though the | Change the scan mode to “INTERLACE”. (A pg. 22) | |
on the TV screen, the | center unit is connected to the TV which does not |
| |
picture is blurred, or the | support the progressive video input such as a |
| |
picture is divided into | conventional TV. |
| |
two parts. |
|
| |
|
|
| |
A disc cannot be played. | The center unit’s and disc’s Region Code numbers are | Replace the disc. (A pg. 3) | |
| incompatible. |
| |
|
|
| |
| Parental Lock is in use. | Enter password to change the Parental Lock level. | |
|
| (A pg. 51) | |
|
|
| |
A disc cannot be played | The disc is loaded with its label and data sides inverted. | Load the disc correctly. (A pg. 23) | |
and “0:00” is displayed |
|
| |
The unplayable disc is loaded. | Replace the disc. (A pg. 3) | ||
on the display window. |
|
| |
Video and audio are | The disc is scratched or dirty. | Replace or clean the disc. (A pg. 2) | |
distorted. |
|
| |
A VCR is connected between the center unit and the | Connect the center unit and TV directly. (A pg. 8) | ||
| TV. |
| |
|
|
| |
| With some discs, a picture may be blurred when setting | Set “PICTURE SOURCE” to “VIDEO (NORMAL)” or | |
| “PICTURE SOURCE” to “FILM” or “AUTO”. | “VIDEO (ACTIVE)”. (A pg. 49) | |
|
|
| |
The picture does not fit | The monitor type is not set correctly. | Set “MONITOR TYPE” properly. (A pg. 49) | |
the TV screen. |
|
| |
The TV is not set correctly. | Set the TV properly. | ||
|
|
| |
No subtitle appears on |
| Some DVDs are programmed to always display no | |
the TV screen though |
| subtitle initially. If this happens, press SUBTITLE on | |
you have selected a | — | the remote control after starting play. (A pg. 39) | |
certain language as your |
|
| |
initial subtitle language. |
|
| |
|
|
| |
Audio language is |
| Some DVDs are programmed to always use the original | |
different from the one |
| language initially. If this happens, press AUDIO on the | |
you have selected as | — | remote control after starting play. (A pg. 39) | |
your initial audio |
|
| |
language. |
|
| |
|
|
|
57