JVC TH-A85, TH-A55 manual For VCR operations, Release F VCR/DBS Try operating your VCR by pressing

Getting started

4 Press number buttons (1-9, 0) to enter	4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).	the manufacturer’s code (2 digits).
Examples:	Examples:	Press 0, then 9.
	For a Philips VCR:
For a GI Jerrold product:Press 0, then 1.
	For an NEC VCR:	Press 2, then 5.
For a Sony product: Press 2, then 0.

Manufacturer	Code
Echostar	21
GI Jerrold	01, 02, 03, 04, 05, 06, 07, 08
Hamin/Regal	15, 16, 17, 18
Pioneer	13, 14
RCA	19
Scientific Atlanta	09, 10
Sony	20
Zenith	11, 12

5 Release F VCR/DBS.

6 Try operating your DBS tuner or CATV converter by pressing F VCR/DBS.

When your DBS tuner or CATV converter turns on or off, you have entered the correct code.

If there is more than one code listed for your brand, try each one until you enter the correct one.

NOTE

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

•Set the codes again after replacing the batteries of the remote control.

Manufacturer	Code	Manufacturer	Code
JVC	01, 02, 03	Philips	09
Emerson	11, 26	RCA	05, 06
Fisher	29	Samsung	24
Funai	10, 14, 15, 16	Sanyo	21, 22, 23
Gold Star	12	Sharp	27, 28
Hitachi	04	Shintom	30
Mitsubishi	13	Sony	18, 19, 20
NEC	25	Zenith	08
Panasonic	07, 17

5 Release F VCR/DBS.

6 Try operating your VCR by pressing

FVCR/DBS.

When your VCR turns on or off, you have entered the correct code.

If there is more than one code listed for your brand, try each one until you enter the correct one.

NOTE

•Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

•Set the codes again after replacing the batteries of the remote control.

7Operation

IMPORTANT

Before using the remote control to operate a

DBS tuner or CATV converter;

•Press CATV/DBS.

The following buttons are available:

FVCR/DBS: Turns DBS tuner or CATV converter on and off.

CHANNEL +/–: Changes the channels.

1-10, 0, +10 (100+): Selects the channel.

For VCR operations

You can operate your VCR using the remote control supplied with this system.

• Refer also to the instruction manuals supplied with your VCR.

7To set the manufacturer’s code

1 Press VCR (Remote control mode selecting button).

7Operation

IMPORTANT

Before using the remote control to operate a VCR;

• Press VCR (Remote control mode selecting button).

The following buttons are available:

FVCR/DBS: Turns VCR on and off. 3(play button): Starts playback.

7 :	Stops operation.
8 :	Pauses playback.
¢:	Fast forwards video tape.
4:	Rewinds video tape.
REC:	Press this button together with 3(play button) to
	start recording or together with 8to pause
	recording.
CHANNEL +/–: Changes the TV channels on the VCR.
1-10,0:	Selects the channel. (for the JVC’s VCR only)

2

3

Press and hold F VCR/DBS.

Keep the button pressed until step 4 is finished.

Press ENTER.

18