JVC SR-MV45U, SR-MV55U Basic Connection, Connecting to a TV Monitor, Connecting to a Camcorder

16 EN INSTALLING YOUR NEW UNIT
Basic Connection					OPERATION CAN BE PERFORMED.
					THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
				Camcorder	Connecting to a TV Monitor
					Connect the unit to a TV depending on the TV and cables you use.
Another Recorder					8 AV Connection
					To connect to a TV with BNC connector —
					A Connect an optional audio cable between the [AUDIO
					OUTPUT] connectors on the rear panel of the unit and the TV’s
					audio input connectors.
Audio/Video		S-video cable			B Connect an optional BNC video cable between the unit’s BNC
			Audio/Video	S-video cable	[VIDEO OUTPUT] connector and the TV’s BNC VIDEO input
cable		(not supplied)			connector.
(not supplied)			cable	(not supplied)
		To S-VIDEO			8 S-Video Connection
			(not supplied)
					To connect to TV’s S-VIDEO input and AUDIO input
		input
	To [AUDIO/VIDEO				connectors —
AC outlet					A Connect the unit’s S-VIDEO output connector to the TV’s
	INPUT]
					S-VIDEO input connector.
				To [S-VIDEO	B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
AC power cord				IN F-1]	AUDIO input connectors.
					● You can obtain high-quality S-VHS pictures.
					● If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT]
					connectors to connect to an audio amplifier for Hi-Fi stereo sound
					reproduction.
					8 Component Video Connection (DVD deck only)
Back of unit					To connect to TV’s component video input connectors —
					A Connect the unit’s [COMPONENT VIDEO OUT (Y/PB/PR)]
To		To	To	To	connectors to the TV’s component video input connectors.
[COMPONENT		[VIDEO	[AUDIO	S-VIDEO	B Connect the unit’s [AUDIO OUTPUT] connectors to the TV’s
VIDEO OUT		OUTPUT]	OUTPUT]	output	AUDIO input connectors.
(Y/PB/PR)]					● You can obtain high-quality component video pictures.
Component video		BNC video	Audio cable	S-video cable	● If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT]
					connectors to connect to an audio amplifier for Hi-Fi stereo sound
cable		cable	(supplied)	(supplied)
					reproduction.
(not supplied)		(not supplied)
					● By using the component video connection, you can view the images
					in the progressive mode. For switching to the progressive mode, refer
					to “Scan Mode Set” ( pg. 65).
					● You can also watch the images on the VCR deck in Progressive scan
					mode via the component video output, refer to “VHS Progressive
					Scan” ( pg. 35).
				TV	Connecting to a Camcorder
					8 AV Connection

	A Connect the unit’s [VIDEO/AUDIO (L/R) IN F-1] connectors on
It’s essential that your unit be properly connected.
	the front panel to the camcorder’s AV connector.
	● Set “FRONT AUX F-1” to “VIDEO”. ( pg. 59)
ATTENTION:	8 S-Video Connection
Connect the AC plug only after all connections to the TV has been	A Connect the unit’s [S-VIDEO IN F-1] connector on the front
completed.	panel to the camcorder’s s-video output connector.
	B Connect the unit’s [AUDIO IN F-1] connectors on the front panel
● Make sure the package contains all of the accessories listed in	to the camcorder’s AV connector.
“SPECIFICATIONS” on page 86.	● Set “FRONT AUX F-1” to “S-VIDEO”. ( pg. 59)

●Place the unit on a stable, horizontal surface.

To connect to a DV camcorder, refer to “DV Dubbing (DVD Deck

Only)” ( pg. 51).

Connecting to Another Recorder

A Connect the unit’s [S-VIDEO INPUT] or [VIDEO INPUT] connector to another recorder’s s-video or video output connector. B Connect the unit’s [AUDIO INPUT] connectors to another recorder’s audio output connectors.

Plug the end of the AC power cord into an AC outlet.

● “LOADING” blinks on the front display panel when the AC plug of the AC power cord is connected into an AC outlet. It takes approximately 50 seconds for the unit to be turned on. This is not a malfunction.