JVC SR-MV55U, SR-MV45U manual Dubbing a Part Of a Disc

			EDITING EN 49
	Manual Dubbing (From DVD To VCR)		1 Load a disc you want to dub on the DVD deck, and a cassette
			with the record safety tab intact on the VCR deck.
			2 Press VCR}DVD to select the dubbing direction. The dubbing
Dubbing A Part Of A Disc
			(DUBB.) lamp lights up on the unit.
			3 Prepare the DVD deck for dubbing.
You can dub the selected scenes on a DVD disc to the tape,
starting and stopping wherever you wish.			A Press VCR/DVD repeatedly so that the DVD lamp lights up on
			the unit.
● Turn on the unit.			B Locate the point from where you want to start dubbing, then
			pause playback by pressing the following buttons: 4, 5, 3,
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/DBS/DVD switch to DVD.		8, 9

			4 Prepare the VCR deck for dubbing.
	REC		A Press VCR/DVD repeatedly so that the VCR lamp lights up on
	VCR/DVD MODE	DUBB. VCR } DVD	the unit.
			B Press REC MODE repeatedly to set the recording mode.
			( pg. 36)
			C Press 7 and 9 simultaneously so that the VCR deck enters the
			Record Pause mode.
			5 Press and hold DUBB. for more than 2 seconds to start the
			dubbing. The dubbing (DUBB.) lamp blinks on the unit.
DUBB. Lamp	83 U 597		6 Press 8 to stop recording on the VCR deck. Then press VCR/
			DVD, and press 8 to stop playback on the DVD deck.
			● Press VCR}DVD to turn off the dubbing (DUBB.) lamp.

VCR/DVD

1 2 3

4 5 6

7 8 9

0

PROGRESSIVE SCAN

4

3 5

8 9

REC MODE

7

NOTES:

●It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points.

●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.

●If you do not want the superimposed indication to be recorded, set “SUPERIMPOSE” to “OFF” before dubbing. ( pg. 59)

●When the end of the tape is reached during dubbing, the tape is ejected and both deck stops.

●When the progressive mode is set, the dubbing (DUBB.) lamp does

not light up on the front display panel. Press PROGRESSIVE SCAN so that video output indicator () lights off on the front display panel.

●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.