JVC SR-MV55U, SR-MV45U manual Dubbing a Part Of a Cassette, Setting

EDITING EN 47

	Manual Dubbing (From VCR To DVD)	1 Press VCR/DVD repeatedly so that the VCR lamp lights up on
		the unit.
		2 Press SET UP to access the Main Menu screen.
Dubbing A Part Of A Cassette
		3 Press rt to select “COPY SET”,	MAIN MENU
You can dub the selected scenes on a tape to the DVD disc,		then press ENTER.
			COPY SET
starting and stopping wherever you wish.				SET
			FUNCTION

●Turn on the unit.

●Turn on the TV and select the AV mode.

● Slide the TV/CABLE/DBS/DVD switch to DVD.	PRESS ( , ), THEN (OK)
	(SET UP) TO END

	REC	VCR ]		4 Press rt to select “COPY MODE”,	COPY SET
				then press ENTER to select “FULL
VCR/DVD MODE		DVD	DUBB.
				COPY” or “1 PROG.”.	COPY MODE	FULL COPY
					FULL DISC	OFF
				● Pressing ENTER toggles the setting
					AUTO FINALIZE	OFF
				between “FULL COPY” and “1 PROG.”.

DUBB. Lamp 83 U 597

5 Press SET UP to complete the

setting.	( , ) THEN (ENTER)
● When “1 PROG.” is selected, recording	(SET UP) TO END

will stop when an index code or unrecorded portion is detected.

6 Load a cassette you want to dub on the VCR deck, and a recordable disc on the DVD deck.

VCR/DVD

1 2 3

4 5 6

7 8 9

0

4

3 5

8 9

7Press VCR]DVD to select the dubbing direction. The dubbing (DUBB.) lamp lights up on the unit.

8Locate the point from where you want to start dubbing, then pause playback by pressing the following buttons: 4, 5, 3,

8, 9

9Prepare the DVD deck for dubbing.

APress VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

B Press REC MODE repeatedly to set the recording mode. ( pg. 36)

C Press 7 and 9 simultaneously so that the DVD deck enters the Record Pause mode.

REC MODE

NOTES:

7

10 Press and hold DUBB. for more than 2 seconds to start dubbing. The dubbing (DUBB.) lamp blinks on the unit.

● When dubbing a tape-end recorded VHS tape, set the input of this

unit to a no signal input before dubbing.

● To stop dubbing, press 8.

● Upon completing dubbing, dubbing ends automatically even without

pressing 8. Press VCR]DVD to turn off the dubbing (DUBB.)

lamp.

●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●It is not possible to dub a tape with a copy protection signal.

●If the recording capacity of disc become full, the tape stops automatically.

●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.

●When dubbing can not be performed properly, set “BLUE BACK” to “OFF”. ( pg. 61)