SUBSIDIARY SETTINGS EN 59
VIDEO IN/OUT
8MONITOR TYPE — 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for
8FRONT AUX F-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the [VIDEO IN
NOTE:
This setting is also applied to the VCR deck.
8REAR AUX L-1 — VIDEO / S-VIDEO
Select the appropriate mode depending on the connector
VIDEO: To use the [VIDEO INPUT] connector on the rear panel.
NOTE:
This setting is also applied to the VCR deck.
DISPLAY SET
8SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators appear on the TV screen.
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately five seconds just after the corresponding operation.
NOTES:
●Even when “SUPERIMPOSE” is set to “OFF”, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.
●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 53)
●When you select “AUTO”, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.
8GRAY BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all gray when there is no signal input from the external input.
NOTE:
When you want to receive an unstable external input with poor signals, set this function to “OFF”.
RECORDING SET
8SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is automatically stored in the library. For details, refer to “Edit Library Information” ( pg. 44).
8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a program in XP mode. When this function is set to “LINEAR PCM”, you can obtain a
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
8DV AUTO CHAPTER — OFF / ON
When this function is set to “ON”, you can create chapters (marks) when dubbing via the DV input terminal connecting the external DV camcorder.
8DIMMER — BRIGHT / DIM
You can change the brightness of the front display panel. BRIGHT: Normally select this.
DIM: To dim the front display panel.
8POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power consumption while the unit is turned off.
NOTES:
●During Power Save mode, it is not possible to engage the Tray Lock function. ( pg. 65)
●It takes some time for the unit to complete initialization after you turn on unit power, with “WAKE UP” blinking on the front display panel.
●When “POWER SAVE” is set to “OFF”, the cooling fan on the rear of the unit may be activated even if the unit is turned off.
8ON SCREEN LANGUAGE
This unit offers you the choice to view on screen messages in 3 different languages.
For details, refer to
OTHERS
8RESUME — OFF / ON / DISC RESUME
When this function is set to “ON” or “DISC RESUME”, you can use the resume function. ( pg. 22)
OFF: You cannot use the resume function.
ON: You can start playback from the resume point of the placed disc.
DISC RESUME: The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected.
NOTE:
“DISC RESUME” setting works on DVD VIDEO, VCD and already finalized